https://www.facebook.com/groups/1016518071797535 is the bore hole, its an hdd jobs group. Post what youre looking for and youll get a bunch of responses.
On Wed, Dec 28, 2022 at 2:38 PM Chuck McCown via AF <af@af.afmug.com> wrote: > Rolling the fiber out on top of the ground. > > *From:* Josh Luthman > *Sent:* Wednesday, December 28, 2022 12:20 PM > *To:* Chuck McCown > *Cc:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] HDD per foot cost > > Well that's $1 foot =) > > On Fri, Dec 23, 2022 at 12:31 PM Chuck McCown <ch...@go-mtc.com> wrote: > >> I will take the $10 every day if it is good plowing. I can do 1K in a >> half hour. >> >> *From:* Josh Luthman >> *Sent:* Friday, December 23, 2022 10:18 AM >> *To:* Chuck McCown >> *Cc:* AnimalFarm Microwave Users Group >> *Subject:* Re: [AFMUG] HDD per foot cost >> >> Well would you rather do 10k feet in a day for $10k or 1k feet in a day >> for $7k? >> >> On Fri, Dec 23, 2022 at 10:47 AM Chuck McCown <ch...@go-mtc.com> wrote: >> >>> My plow cost me $125K used and takes a semi to move. You will not get >>> the plow, fuel, operator and mobilization for $1/foot unless it is 1M feet >>> through Nebraska sod with no stops. >>> >>> *From:* Josh Luthman >>> *Sent:* Friday, December 23, 2022 6:11 AM >>> *To:* AnimalFarm Microwave Users Group >>> *Cc:* Chuck McCown >>> *Subject:* Re: [AFMUG] HDD per foot cost >>> >>> $2.25 for plowing here, should be $1 if you ask me. >>> >>> On Thu, Dec 22, 2022 at 3:39 PM Chuck McCown via AF <af@af.afmug.com> >>> wrote: >>> >>>> I wish I could get that for plowing. Normally it is in the $4.50 range >>>> assuming wide open range. I have seen it as low as $1.50. >>>> >>>> *From:* dmmoff...@gmail.com >>>> *Sent:* Thursday, December 22, 2022 1:33 PM >>>> *To:* 'AnimalFarm Microwave Users Group' >>>> *Subject:* Re: [AFMUG] HDD per foot cost >>>> >>>> >>>> The highest I saw was $50/ft. >>>> >>>> >>>> >>>> $6-8 sounds like plowing prices. I’d expect at least $15/ft for HDD. >>>> Whoever’s doing it for $6-8/ft don’t lose that guy’s number. >>>> >>>> >>>> >>>> >>>> >>>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Jim Bouse [Brazos >>>> WiFi] >>>> *Sent:* Thursday, December 22, 2022 10:27 AM >>>> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >>>> *Subject:* Re: [AFMUG] HDD per foot cost >>>> >>>> >>>> >>>> That varies greatly. Somewhere between $6-8/ft here in central Texas >>>> rural roads and rural subdivisions. Anywhere with more obstructions will >>>> cost significantly more due to the effort to avoid other utilities. >>>> >>>> >>>> >>>> Jim Bouse >>>> Owner - Brazos WiFi >>>> 979-999-7000 >>>> http://www.brazoswifi.com >>>> >>>> >>>> >>>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Carl Peterson >>>> *Sent:* Thursday, December 22, 2022 9:24 AM >>>> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >>>> *Subject:* [AFMUG] HDD per foot cost >>>> >>>> >>>> >>>> >>>> What is the going rate per foot for HDD drilling and pullback of two >>>> SDR11 ducts and a trace wire? Very sandy soil in the FL panhandle. All >>>> materials provided? Around 4-5K' split into three or four runs. >>>> >>>> >>>> >>>> -- >>>> >>>> Carl Peterson >>>> >>>> *PORT NETWORKS* >>>> >>>> 401 E Pratt St, Ste 2553 >>>> >>>> Baltimore, MD 21202 >>>> >>>> (410) 637-3707 >>>> ------------------------------ >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com