I will take the $10 every day if it is good plowing.  I can do 1K in a half 
hour.  

From: Josh Luthman 
Sent: Friday, December 23, 2022 10:18 AM
To: Chuck McCown 
Cc: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] HDD per foot cost

Well would you rather do 10k feet in a day for $10k or 1k feet in a day for $7k?

On Fri, Dec 23, 2022 at 10:47 AM Chuck McCown <ch...@go-mtc.com> wrote:

  My plow cost me $125K used and takes a semi to move.  You will not get the 
plow, fuel, operator and mobilization for $1/foot unless it is 1M feet through 
Nebraska sod with no stops.  

  From: Josh Luthman 
  Sent: Friday, December 23, 2022 6:11 AM
  To: AnimalFarm Microwave Users Group 
  Cc: Chuck McCown 
  Subject: Re: [AFMUG] HDD per foot cost

  $2.25 for plowing here, should be $1 if you ask me.

  On Thu, Dec 22, 2022 at 3:39 PM Chuck McCown via AF <af@af.afmug.com> wrote:

    I wish I could get that for plowing.  Normally it is in the $4.50 range 
assuming wide open range.  I have seen it as low as $1.50.  

    From: dmmoff...@gmail.com 
    Sent: Thursday, December 22, 2022 1:33 PM
    To: 'AnimalFarm Microwave Users Group' 
    Subject: Re: [AFMUG] HDD per foot cost

    The highest I saw was $50/ft.



    $6-8 sounds like plowing prices. I’d expect at least $15/ft for HDD.  
Whoever’s doing it for $6-8/ft don’t lose that guy’s number.





    From: AF <af-boun...@af.afmug.com> On Behalf Of Jim Bouse [Brazos WiFi]
    Sent: Thursday, December 22, 2022 10:27 AM
    To: AnimalFarm Microwave Users Group <af@af.afmug.com>
    Subject: Re: [AFMUG] HDD per foot cost



    That varies greatly.  Somewhere between $6-8/ft here in central Texas rural 
roads and rural subdivisions.  Anywhere with more obstructions will cost 
significantly more due to the effort to avoid other utilities.



    Jim Bouse
    Owner - Brazos WiFi
    979-999-7000
    http://www.brazoswifi.com



    From: AF <af-boun...@af.afmug.com> On Behalf Of Carl Peterson
    Sent: Thursday, December 22, 2022 9:24 AM
    To: AnimalFarm Microwave Users Group <af@af.afmug.com>
    Subject: [AFMUG] HDD per foot cost






    What is the going rate per foot for HDD drilling and pullback of two SDR11 
ducts and a trace wire?  Very sandy soil in the FL panhandle.  All materials 
provided?  Around 4-5K' split into three or four runs. 



    -- 

    Carl Peterson

    PORT NETWORKS

    401 E Pratt St, Ste 2553

    Baltimore, MD 21202

    (410) 637-3707 


----------------------------------------------------------------------------
    -- 
    AF mailing list
    AF@af.afmug.com
    http://af.afmug.com/mailman/listinfo/af_af.afmug.com

    -- 
    AF mailing list
    AF@af.afmug.com
    http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to