No I was using airfiber, and SAEI.
I would be cautious of planning on having availability of Tibit moving
forward. It's likely Ciena will lock it to using there hardware in the
future.
On 3/6/2023 2:37 PM, Carl Peterson wrote:
Thanks Trey! Were you also testing Siklu -> Tibit?
On Mon, Mar 6, 2023 at 2:35 PM Trey Scarborough <t...@3dsc.co> wrote:
Carl I am pretty sure that is the same cable I used to test a Tbit
to radio connection and I didn't have any issues. Also I know they
work in the CRS305-1G-4S+IN.
On 3/3/2023 9:49 AM, Carl Peterson wrote:
I'm not doing liquid cooling. See the pics I posted above. Just
need to extend the SFP+ cage out of a Siklu radio. The
alternative is to add another little switch but that adds
complexity to what is a simple design. PON hanging off a Siklu
for a small apartment building. Only thing active is the Siklu
and the "SFP". One cyber power 48V battery backup to power the
silku. If you add a switch, how are you powering it, where is it
mounted, etc.
On the note of adding a switch. Has anyone used
the CRS305-1G-4S+IN? Anyone have a contact at Mikrotiik who
could find out the SFP+ port's power budget?
On Fri, Mar 3, 2023 at 9:32 AM <dmmoff...@gmail.com> wrote:
I’m curious what Carl Peterson is doing too.
The description on the linked item says it’s so you can put
your electronics into immersed liquid cooling without
exposing your optics to the liquid. Pretty esoteric stuff.
Not understanding the use case, but assuming there’s a reason
you can’t extend the fiber a few feet with a jumper and
mating sleeve, then how about use a DAC to reach another switch?
*From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Zach
Underwood
*Sent:* Friday, March 03, 2023 9:58 AM
*To:* AnimalFarm Microwave Users Group <af@af.afmug.com>
*Subject:* Re: [AFMUG] SFP+ cage extender
I am curious what the application is that a longer cable
would not address? I have never heard of such a device.
On Fri, Mar 3, 2023 at 9:56 AM Carl Peterson
<cpeter...@portnetworks.com> wrote:
I have an application where I need to extend a SFP+ cage
a foot or two but need 3.5W peak and 2.7W
continuous power. The existing device supports the power
but the only SFP+ cage extender I can find is only rated
at 2.5W. Can you passively just extend the cage pins or
is this something that requires electronics? Anyone know
of a higher power SFP extension cable?
https://www.sfpcables.com/sfp-to-sfp-cage-with-3m-flat-cable-in-nylon-jacket-20cm-and-55cm-length-3256-5454
--
Carl Peterson
*PORT NETWORKS*
401 E Pratt St, Ste 2553
Baltimore, MD 21202
(410) 637-3707
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
advance-networking.com <http://advance-networking.com>
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
Carl Peterson
*PORT NETWORKS*
401 E Pratt St, Ste 2553
Baltimore, MD 21202
(410) 637-3707
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
Carl Peterson
*PORT NETWORKS*
401 E Pratt St, Ste 2553
Baltimore, MD 21202
(410) 637-3707
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com