Lower timers to 15s/45s and see if you can enable BFD, I think this has to be coordinated with the upstreams? maybe someone can confirm
On Wed, Apr 19, 2023 at 3:20 PM Chuck McCown via AF <af@af.afmug.com> wrote: > I remember seeing that at the drive in. Double feature with Andromeda > Strain. > > “This is the voice of Colossus” AI hooked with an AI in Russia... > > *From:* Robert > *Sent:* Wednesday, April 19, 2023 3:55 PM > *To:* af@af.afmug.com > *Subject:* Re: [AFMUG] BGP Question > > How about the original Colossus? > > On 4/19/23 1:55 PM, James Howard wrote: > > well my Atari 2600 can't do it in a year > > > ------------------------------ > *From*: "Chuck McCown via AF" mailto:af@af.afmug.com > *Sent*: 4/19/23 1:06 PM > *To*: "AnimalFarm Microwave Users Group" mailto:af@af.afmug.com > *Cc*: ch...@go-mtc.com > *Subject*: Re: [AFMUG] BGP Question > > My arduino nano can do it in a week. > > > > *From:* Steven Kenney via AF > *Sent:* Wednesday, April 19, 2023 11:51 AM > *To:* AnimalFarm Microwave Users Group > *Cc:* Steven Kenney > *Subject:* Re: [AFMUG] BGP Question > > My raspberry pi does it in under an hour. > > On Wed, Apr 19, 2023 at 1:26 PM Josh Luthman <j...@imaginenetworksllc.com> > wrote: > > I want to say my old x86 would do full tables in 3 minutes...that's been a > while. > > I think the CCR1009/1036/1072 is a couple of minutes, I don't think it's > 10-15 though. > > On Wed, Apr 19, 2023 at 11:20 AM Mark - Myakka Technologies < > m...@mailmt.com> wrote: > > Dennis, > > Using mikrotik routers. > > Two MaxxWave x86 i5 8 core 10 years old v6.47.9 > > One CCR1072 v6.47.9 > > Yes taking full tables. > > Tried BFD while back. Didn't seem that my upstream was supporting it. > Never established a session. > > Thinking I may need to start looking at new hardware and v7. But before I > go that route, what should I expect if I do get 3 brand new CCR2116-12G-4S+ > running v7. > > > -- > Best regards, > Mark mailto:m...@mailmt.com > > Myakka Communications > www.Myakka.com > > ------ > > Wednesday, April 19, 2023, 11:08:45 AM, you wrote: > > DB> Really depends on a lot of things. > > DB> 1.What router are you using? > DB> 2. Are you taking full tables from all of your upstreams? > DB> 3. Are you not using BFD ? > DB> 4. What version of RouterOS are you using? > > DB> V7 will be faster, 2216 will be faster than a 1036, your hold time is > kinda long.. > > > DB> Dennis Burgess, Mikrotik Certified Trainer > DB> MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE, MTCSE, HE IPv6 Sage, Cambium ePMP > Certified > DB> Author of "Learn RouterOS- Second Edition" > DB> Link Technologies, Inc -- Mikrotik & WISP Support Services > DB> Office: 314-735-0270 Website: http://www.linktechs.net > DB> Need to Automate MikroTik Backups: https://cloud.linktechs.net > DB> Create Wireless Coverage's with www.towercoverage.com > > DB> -----Original Message----- > DB> From: AF <af-boun...@af.afmug.com> On Behalf Of Mark - Myakka > Technologies > DB> Sent: Wednesday, April 19, 2023 9:48 AM > DB> To: af@af.afmug.com > DB> Subject: [AFMUG] BGP Question > > DB> We have two circuits coming into our NOC. We peer with 3 different > providers on each circuit. If a circuit fails, BGP will do it's magic and > traffic will start flowing though the surviving circuit. > > DB> However, we seemed to get about 5 - 10 minutes of unstable Internet > while this is happening. Is this normal? If not, what can I do to speed up > the process? Is it a function of my routers having to rebuild routes? > Will new faster routers help? Is it a function of timers? Keep-Alive is > 30s and hold is at 90s. Should I investigate BFD? > > DB> How fast could I expect to get this fail-over to work under best > conditions? > > DB> Thanks, > DB> Mark mailto:m...@mailmt.com > > DB> Myakka Communications > DB> > https://imsva91-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.Myakka.com&umid=08E7599C-F9B1-CC05-BF9C-94CA5B14AB1B&auth=079c058f437b7c6303d36c6513e5e8848d0c5ac4-1a5796e3447e2e1707012b957aa10dd6970458d5 > > > DB> -- > DB> AF mailing list > DB> AF@af.afmug.com > DB> http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > NOTICE OF CONFIDENTIALITY This communication, including any attachments, > is intended only for the use of the addressee(s) to this email and is > confidential. If you are not an intended recipient or acting on behalf of > an intended recipient, any review, disclosure, conversion to hard copy, > dissemination, reproduction or other use of any part of this communication > is strictly prohibited. If you receive this communication in error or > without authorization, please notify the originator immediately and remove > it from your system. > > > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Thank you, TJ Trout Volt Broadband 209.480.3122 Cell
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com