We have migrated from v6.x to v7.7 and v7.8 now. OSPF seems to work fine interacting between the two versions, just have to copy over some settings appropriately is all.
From: AF <af-boun...@af.afmug.com> On Behalf Of Mark - Myakka Technologies Sent: Thursday, April 20, 2023 9:03 AM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] BGP Question Josh, I will. I think v7 will be able to handle BGP, OSPF and Filter rules just fine. Learning the new configure of v7 should not be a huge issue. The big thing I'm worried about is the OSPF interaction between the versions. -- Best regards, Mark mailto:m...@mailmt.com Myakka Communications www.Myakka.com<https://www.Myakka.com> ------ Thursday, April 20, 2023, 10:52:37 AM, you wrote: Let us know how that goes - I was just looking at the 2116 myself. On Thu, Apr 20, 2023 at 10:40 AM Mark - Myakka Technologies <m...@mailmt.com<mailto:m...@mailmt.com>> wrote: Mike, I think I'll have to upgrade to v7 and a some 2216 units. Guess it is time to try to integrate some v7 units into the v6 network and see what happens. -- Best regards, Mark mailto:m...@mailmt.com Myakka Communications www.Myakka.com<https://www.Myakka.com> ------ Thursday, April 20, 2023, 10:10:32 AM, you wrote: Years ago on ROX v6 on a 1036, it would take 5 - 10 minutes for /ip route print to reflect an upstream change and then another 5 - 10 minutes for the traffic to actually change directions. ----- Mike Hammett Intelligent Computing Solutions<http://www.ics-il.com/> Midwest Internet Exchange The Brothers WISP <https://www.facebook.com/ICSIL> ________________________________ From: "Josh Luthman" <j...@imaginenetworksllc.com> To: "AnimalFarm Microwave Users Group" <af@af.afmug.com> Sent: Wednesday, April 19, 2023 12:25:14 PM Subject: Re: [AFMUG] BGP Question I want to say my old x86 would do full tables in 3 minutes...that's been a while. I think the CCR1009/1036/1072 is a couple of minutes, I don't think it's 10-15 though. On Wed, Apr 19, 2023 at 11:20 AM Mark - Myakka Technologies <m...@mailmt.com> wrote: Dennis, Using mikrotik routers. Two MaxxWave x86 i5 8 core 10 years old v6.47.9 One CCR1072 v6.47.9 Yes taking full tables. Tried BFD while back. Didn't seem that my upstream was supporting it. Never established a session. Thinking I may need to start looking at new hardware and v7. But before I go that route, what should I expect if I do get 3 brand new CCR2116-12G-4S+ running v7. -- Best regards, Mark mailto:m...@mailmt.com Myakka Communications www.Myakka.com ------ Wednesday, April 19, 2023, 11:08:45 AM, you wrote: DB> Really depends on a lot of things. DB> 1.What router are you using? DB> 2. Are you taking full tables from all of your upstreams? DB> 3. Are you not using BFD ? DB> 4. What version of RouterOS are you using? DB> V7 will be faster, 2216 will be faster than a 1036, your hold time is kinda long.. DB> Dennis Burgess, Mikrotik Certified Trainer DB> MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE, MTCSE, HE IPv6 Sage, Cambium ePMP Certified DB> Author of "Learn RouterOS- Second Edition" DB> Link Technologies, Inc -- Mikrotik & WISP Support Services DB> Office: 314-735-0270 Website: http://www.linktechs.net DB> Need to Automate MikroTik Backups: https://cloud.linktechs.net DB> Create Wireless Coverage's with www.towercoverage.com DB> -----Original Message----- DB> From: AF <af-boun...@af.afmug.com> On Behalf Of Mark - Myakka Technologies DB> Sent: Wednesday, April 19, 2023 9:48 AM DB> To: af@af.afmug.com DB> Subject: [AFMUG] BGP Question DB> We have two circuits coming into our NOC. We peer with 3 different providers on each circuit. If a circuit fails, BGP will do it's magic and traffic will start flowing though the surviving circuit. DB> However, we seemed to get about 5 - 10 minutes of unstable Internet while this is happening. Is this normal? If not, what can I do to speed up the process? Is it a function of my routers having to rebuild routes? Will new faster routers help? Is it a function of timers? Keep-Alive is 30s and hold is at 90s. Should I investigate BFD? DB> How fast could I expect to get this fail-over to work under best conditions? DB> Thanks, DB> Mark mailto:m...@mailmt.com DB> Myakka Communications DB> https://imsva91-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.Myakka.com&umid=08E7599C-F9B1-CC05-BF9C-94CA5B14AB1B&auth=079c058f437b7c6303d36c6513e5e8848d0c5ac4-1a5796e3447e2e1707012b957aa10dd6970458d5 DB> -- DB> AF mailing list DB> AF@af.afmug.com DB> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
