2016 being the 2116? Or the 2216? Sounds like you didn't install it? Swap it in there and see if it fixes your issue.
On Tue, Apr 25, 2023 at 6:10 PM Mark - Myakka Technologies <m...@mailmt.com> wrote: > I have the new 2016 in and programmed up. But I'm still dealing with more > immediate issues. > > > > We are taking a mix of full or partial routes from our providers. The > issue seems to be when one line gets cut, it takes a bit for our old > routers to recalculate the tables. > > > > Should I just take default routes? That way there is a lot less math > needed when a line goes down. I'm assuming inbound BGP will still be > optimized for shorted path. How will that work for the two IX's we connect > to? Are they smart enough to calculate best path even if the traffic comes > from outside the IX. > > > -- > > Best regards, > > Mark mailto:m...@mailmt.com <m...@mailmt.com> > > > Myakka Communications > > www.Myakka.com > > > ------ > > > Thursday, April 20, 2023, 11:37:35 AM, you wrote: > > > We did not have to do that. But we did set some values the same/similar in > the OSPF interfaces. > > Maybe it’s a matter of implementation, but we do not use broadcast on > interfaces and we do not use md5. > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Steve Jones > *Sent:* Thursday, April 20, 2023 9:21 AM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* Re: [AFMUG] BGP Question > > > > we had to change our ospf from simple to md5 and from point to point to > broadcast to get it to play ball between v7 and v6 > > > > On Thu, Apr 20, 2023 at 10:03 AM Mark - Myakka Technologies < > m...@mailmt.com> wrote: > > Josh, > > > > I will. I think v7 will be able to handle BGP, OSPF and Filter rules just > fine. Learning the new configure of v7 should not be a huge issue. The > big thing I'm worried about is the OSPF interaction between the versions. > > > > -- > > Best regards, > > Mark mailto:m...@mailmt.com <m...@mailmt.com> > > > > Myakka Communications > > www.Myakka.com > > > > ------ > > > > Thursday, April 20, 2023, 10:52:37 AM, you wrote: > > > > Let us know how that goes - I was just looking at the 2116 myself. > > > > On Thu, Apr 20, 2023 at 10:40 AM Mark - Myakka Technologies < > m...@mailmt.com> wrote: > > Mike, > > > > I think I'll have to upgrade to v7 and a some 2216 units. Guess it is > time to try to integrate some v7 units into the v6 network and see what > happens. > > > > > > -- > > Best regards, > > Mark mailto:m...@mailmt.com <m...@mailmt.com> > > > > Myakka Communications > > www.Myakka.com > > > > ------ > > > > Thursday, April 20, 2023, 10:10:32 AM, you wrote: > > > > Years ago on ROX v6 on a 1036, it would take 5 - 10 minutes for /ip route > print to reflect an upstream change and then another 5 - 10 minutes for the > traffic to actually change directions. > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > > *Midwest Internet Exchange* > > *The Brothers WISP* > > > > <https://www.facebook.com/ICSIL> > ------------------------------ > > *From: *"Josh Luthman" <*j...@imaginenetworksllc.com*> > *To: *"AnimalFarm Microwave Users Group" <*af@af.afmug.com*> > *Sent: *Wednesday, April 19, 2023 12:25:14 PM > *Subject: *Re: [AFMUG] BGP Question > > I want to say my old x86 would do full tables in 3 minutes...that's been a > while. > > I think the CCR1009/1036/1072 is a couple of minutes, I don't think it's > 10-15 though. > > > > On Wed, Apr 19, 2023 at 11:20 AM Mark - Myakka Technologies < > *m...@mailmt.com*> wrote: > > Dennis, > > Using mikrotik routers. > > Two MaxxWave x86 i5 8 core 10 years old v6.47.9 > > One CCR1072 v6.47.9 > > Yes taking full tables. > > Tried BFD while back. Didn't seem that my upstream was supporting it. > Never established a session. > > Thinking I may need to start looking at new hardware and v7. But before I > go that route, what should I expect if I do get 3 brand new CCR2116-12G-4S+ > running v7. > > > -- > Best regards, > Mark mailto:*m...@mailmt.com* > > Myakka Communications > *www.Myakka.com* > > ------ > > Wednesday, April 19, 2023, 11:08:45 AM, you wrote: > > DB> Really depends on a lot of things. > > DB> 1.What router are you using? > DB> 2. Are you taking full tables from all of your upstreams? > DB> 3. Are you not using BFD ? > DB> 4. What version of RouterOS are you using? > > DB> V7 will be faster, 2216 will be faster than a 1036, your hold time is > kinda long.. > > > DB> Dennis Burgess, Mikrotik Certified Trainer > DB> MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE, MTCSE, HE IPv6 Sage, Cambium ePMP > Certified > DB> Author of "Learn RouterOS- Second Edition" > DB> Link Technologies, Inc -- Mikrotik & WISP Support Services > DB> Office: 314-735-0270 Website: *http://www.linktechs.net* > DB> Need to Automate MikroTik Backups: *https://cloud.linktechs.net* > DB> Create Wireless Coverage's with *www.towercoverage.com* > > DB> -----Original Message----- > DB> From: AF <*af-boun...@af.afmug.com*> On Behalf Of Mark - Myakka > Technologies > DB> Sent: Wednesday, April 19, 2023 9:48 AM > DB> To: *af@af.afmug.com* > DB> Subject: [AFMUG] BGP Question > > DB> We have two circuits coming into our NOC. We peer with 3 different > providers on each circuit. If a circuit fails, BGP will do it's magic and > traffic will start flowing though the surviving circuit. > > DB> However, we seemed to get about 5 - 10 minutes of unstable Internet > while this is happening. Is this normal? If not, what can I do to speed up > the process? Is it a function of my routers having to rebuild routes? > Will new faster routers help? Is it a function of timers? Keep-Alive is > 30s and hold is at 90s. Should I investigate BFD? > > DB> How fast could I expect to get this fail-over to work under best > conditions? > > DB> Thanks, > DB> Mark mailto:*m...@mailmt.com* > > DB> Myakka Communications > DB> > *https://imsva91-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.Myakka.com&umid=08E7599C-F9B1-CC05-BF9C-94CA5B14AB1B&auth=079c058f437b7c6303d36c6513e5e8848d0c5ac4-1a5796e3447e2e1707012b957aa10dd6970458d5* > > > DB> -- > DB> AF mailing list > DB> *AF@af.afmug.com* > DB> *http://af.afmug.com/mailman/listinfo/af_af.afmug.com* > > > > -- > AF mailing list > *AF@af.afmug.com* > *http://af.afmug.com/mailman/listinfo/af_af.afmug.com* > > > -- > AF mailing list > *AF@af.afmug.com* > *http://af.afmug.com/mailman/listinfo/af_af.afmug.com* > > > > -- > AF mailing list > *AF@af.afmug.com* > *http://af.afmug.com/mailman/listinfo/af_af.afmug.com* > <https://www.facebook.com/ICSIL> > > -- > AF mailing list > *AF@af.afmug.com* > *http://af.afmug.com/mailman/listinfo/af_af.afmug.com* > <https://www.facebook.com/ICSIL> > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com