That is freakin awesome! I think Matt said something about a RADIUS VSA
option too. RADIUS and DHCP option 66. Both are good with me.
On 9/18/2014 4:41 PM, Aaron Schneider via Af wrote:
Hi George -
I know this was a long time ago (and has been an even longer time coming), but
attached is what I sent after AF2014.
What we have now is the file format, it will be JSON based and there will be a
published spec. It will also work with DHCP Option 66. For Zero Touch Config
type of operation, we are leveraging the ICC feature in that once a radio is on
13.3, if a radio registers via ICC, it will turn on DHCP and request Option 66.
That option can be populated with a URL to the config file (HTTP or TFTP) that
will be retrieved and applied and if a reboot is required, the reboot will be
applied. Once the SM comes back if it had to reboot, it will be on the new
configuration.
You will also be able to backup/restore the file via the webpage and SNMP and
read it and edit it.
Again, this is coming in 13.3 release and we'll be discussing some things at
WISPAPALOOZA related to this. Obviously an SM needs to be on 13.3 to support
this, so the fully promise of Zero Touch Config won't be there until SMs are
shipping with 13.3 on them.
That is the update we have to give you at this point.
Regards,
-Aaron
-----Original Message-----
From: Af [mailto:af-bounces+aaron.schneider=cambiumnetworks....@afmug.com] On
Behalf Of George Skorup (Cyber Broadcasting) via Af
Sent: Thursday, September 18, 2014 12:56 PM
To: af@afmug.com
Subject: Re: [AFMUG] Dear Cambium
I know a TFTP config download kind of thing was talked about before. But it
would be nice if we could manually apply a config template file directly
through the SM GUI, so I can have the guys get new or recovered radios set up
without having to mess with too many things (AP, TFTP server, etc), just upload
file.. apply, reboot, whatever.
On 9/18/2014 10:00 AM, Aaron Schneider via Af wrote:
Hi Bill -
1) coming in 13.2
2) coming in 13.2, NAT table size is configurable from 1024 - 8192
entries, there is a configuration OID, and will be a current table
size oid
3) possibly coming in 13.3, can't promise that yet
4) coming in 13.3, planning to have something at WISPAPALOOZA to demo, more
than just a config file. I sent some information about this awhile back.
5) we are working on an external frame calc tool but not sure of the timeline of that.
Will make sure to add this idea to that list (point to an AP to use as a "starting
point").
I'll send more details on #4 soon and we will be publishing the config file
format.
Regards,
-Aaron
-----Original Message-----
From: Af
[mailto:af-bounces+aaron.schneider=cambiumnetworks....@afmug.com] On
Behalf Of Bill Prince via Af
Sent: Wednesday, September 17, 2014 6:31 PM
To: Motorola III
Subject: [AFMUG] Dear Cambium
Please let us know if:
1. The femtocell fix is in the pipe (or not) 2. There will be a trap on NAT
table full, or at least an OID that
shows the number of entries in the NAT table 3. As an alternative to #2,
perhaps a way to limit the number of MAC
addresses allowed behind an SM
4. A text-based configuration file
5. A "do this timing" that lets us just set an AP to match some other
AP as closely as possible by specifying the appropriate frame
dimensions (or maybe just the other APs IP address (now that would
be cool)
TNX
--
bp
