IIRC, it needs to be a roll-over cable. Pin 1 to 6 and 2 to 3. 2 & 3 if
you care about the GPS data, otherwise just 1 to 6 and 6 to 1.
On 10/6/2014 3:48 PM, Paul McCall via Af wrote:
I have to hook up a CMM to a tower that already has a CMM on it, like
today. There is a �timing� 6 pin connector on the CMM. Can that be
used to bridge the sync to the 2^nd CMM? If so, how would that be
wired, and what setting would I make in the CMM(s) so that it would
know to use it
Paul
Paul McCall, Pres.
PDMNet / Florida Broadband
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800 office
772-473-0352 cell
www.pdmnet.com <http://www.pdmnet.com/>
pa...@pdmnet.net <mailto:pa...@pdmnet.net>