Find an old laptop running windows XP or (even better) Windows 2000.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman via Af Sent: Wednesday, November 26, 2014 8:38 AM To: af@afmug.com Subject: Re: [AFMUG] SiteMonitor discovery IP or factory reset I tried one of each. No combo worked. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 26, 2014 8:34 AM, "Jeremy via Af" <af@afmug.com> wrote: Yeah, I must have missed that part. Is this one of the old site monitors? On Wed, Nov 26, 2014 at 6:04 AM, Josh Luthman via Af <af@afmug.com> wrote: That was a base2 though right? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 26, 2014 12:59 AM, "Jeremy via Af" <af@afmug.com> wrote: I actually had to use this tool on a site tonight. I used the new Ethernet Upgrade Tool for windows, was directly connected to the Ethernet port on my laptop. I pressed 'yeah I have read the blah blah blah' and then hit discover, it told me to reboot. I disconnected power 1 and 2 for a sec and when I plugged it back in it gave me the IP. Then I couldn't figure out the SNMP so I had to use it again to reset, same process. It worked perfectly both times. On Mon, Nov 24, 2014 at 7:28 AM, Josh Luthman via Af <af@afmug.com> wrote: Not sure what email address to use offlist... I've done all that several times to confirm. I also went straight to the NIC as well as trying a Netgear dumb switch (it had link light, doesn't specify speed/duplex). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Nov 24, 2014 at 3:33 AM, Forrest Christian (List Account) via Af <af@afmug.com> wrote: Unfortunately there's quite a few things which will break the tool. I've attached a .pdf which should cover all of them. Make sure you have the right tool as described, and if you have problems afterwards let me know. -forrest
