I guess time will tell....
On Mon, Dec 15, 2014 at 12:41 PM, Josh Luthman via Af <af@afmug.com> wrote: > > I don't think so, but look at the website's notice. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Dec 15, 2014 1:38 PM, "Erich Kaiser via Af" <af@afmug.com> wrote: > >> Do they have a holder for the larger POE units? >> >> On Mon, Dec 15, 2014 at 11:25 AM, Josh Luthman via Af <af@afmug.com> >> wrote: >>> >>> Try http://poemounts.com/ >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Mon, Dec 15, 2014 at 12:20 PM, That One Guy via Af <af@afmug.com> >>> wrote: >>> >>>> anybody have a cheap universal solution for the different size power >>>> supplies and poe injectors? >>>> >>>> I finally have a mix of rack and DIN in our enclosures to handle most >>>> of the gear keeping it pretty, but the power supplies are the problem now. >>>> Velcro is good, but they tend to slide out. Zip ties are perfect, except in >>>> a pinch nobody has them or uses them and just throws power supplies in the >>>> box loose. >>>> >>>> -- >>>> All parts should go together without forcing. You must remember that >>>> the parts you are reassembling were disassembled by you. Therefore, if you >>>> can't get them together again, there must be a reason. By all means, do not >>>> use a hammer. -- IBM maintenance manual, 1925 >>>> >>> >>>