Matt, Where do you get that stuff? Looks great!
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 15, 2014 8:02 PM, "Matt Jenkins via Af" <af@afmug.com> wrote: > I use 3M Dual Lock > > http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/ > Tapes/Brands/Dual-Lock-Reclosable-Fasteners/ > > It works at really low and high temps. Its like velcro but WAY better. > Sticks to anything. You can buy it in long rolls and cut it to the size you > need. > > The next step is training everyone to carry it with them when they go to a > site to fix something. > > Matthew Jenkins > SmarterBroadband > m...@sbbinc.net > 530.272.4000 > > On 12/15/2014 09:20 AM, That One Guy via Af wrote: > >> anybody have a cheap universal solution for the different size power >> supplies and poe injectors? >> >> I finally have a mix of rack and DIN in our enclosures to handle most of >> the gear keeping it pretty, but the power supplies are the problem now. >> Velcro is good, but they tend to slide out. Zip ties are perfect, except in >> a pinch nobody has them or uses them and just throws power supplies in the >> box loose. >> >> -- >> All parts should go together without forcing. You must remember that the >> parts you are reassembling were disassembled by you. Therefore, if you >> can't get them together again, there must be a reason. By all means, do not >> use a hammer. -- IBM maintenance manual, 1925 >> > >