I use 3M Dual Lock
http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Brands/Dual-Lock-Reclosable-Fasteners/
It works at really low and high temps. Its like velcro but WAY better.
Sticks to anything. You can buy it in long rolls and cut it to the size
you need.
The next step is training everyone to carry it with them when they go to
a site to fix something.
Matthew Jenkins
SmarterBroadband
m...@sbbinc.net
530.272.4000
On 12/15/2014 09:20 AM, That One Guy via Af wrote:
anybody have a cheap universal solution for the different size power
supplies and poe injectors?
I finally have a mix of rack and DIN in our enclosures to handle most
of the gear keeping it pretty, but the power supplies are the problem
now. Velcro is good, but they tend to slide out. Zip ties are perfect,
except in a pinch nobody has them or uses them and just throws power
supplies in the box loose.
--
All parts should go together without forcing. You must remember that
the parts you are reassembling were disassembled by you. Therefore, if
you can't get them together again, there must be a reason. By all
means, do not use a hammer. -- IBM maintenance manual, 1925
