Its great that you like the PMP100 platform.
If by bloated software, you mean Nate's GUI load time, we're actively investigating that with some information we got from Nate offline. For PTP applications, you should be able to use max power. Please hit me up offline as well if you'd like to discuss specific scenarios. Thanks, Sriram ________________________________ From: Af <[email protected]> on behalf of John Woodfield <[email protected]> Sent: Wednesday, January 21, 2015 9:00 PM To: [email protected] Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? So how about fixing the bloated software? The old pmp100 software was great comparatively. Also, how about a EIRP fix so we can turn the power up in ptp applications or turn up if using a low gain antenna? John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) 708-1937 -----Original Message----- From: "Sriram Chaturvedi" <[email protected]> Sent: Wednesday, January 21, 2015 9:55pm To: "[email protected]" <[email protected]> Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? Wow. I stepped away for a couple of hours and this escalated pretty quickly. Mike - It certainly wasn't me that you talked to although it doesn't seem to matter what I say. Something about governments, companies and stuff and some folks wanting design documents. But you are right, ePMP is something where we see it as an opportunity to do things differently. We make mistakes no doubt but at least we know we tried and fix it as quickly as possible. ________________________________ From: Af <[email protected]> on behalf of Mike Hammett <[email protected]> Sent: Wednesday, January 21, 2015 8:33 PM To: [email protected] Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? I specifically asked Cambium staff face to face on at least three occasions about it and it was avoided. It wasn't until I was at the office in September that they put it to rest. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ________________________________ From: "Sriram Chaturvedi" <[email protected]> To: [email protected] Sent: Wednesday, January 21, 2015 6:16:27 PM Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? Really? First time I'm hearing this and I've been on this list for a while. I must've missed it. I will tell you now that ePMP was designed and built in Cambium. Hope that clears up any confusion. ________________________________ From: Af <[email protected]> on behalf of Tyler Treat <[email protected]> Sent: Wednesday, January 21, 2015 6:11 PM To: [email protected] Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? I think everyone assumed epmp = further refined MemoryLink... At least initially. ___________________________ Mangled by my iPhone. ___________________________ Tyler Treat Corn Belt Technologies, Inc. [email protected]<mailto:[email protected]> ___________________________ On Jan 21, 2015, at 5:58 PM, Sriram Chaturvedi <[email protected]<mailto:[email protected]>> wrote: You can put that rumor to rest because it’s not true. From: Af [mailto:[email protected]] On Behalf Of Josh Reynolds Sent: Wednesday, January 21, 2015 5:30 PM To: [email protected]<mailto:[email protected]>; Jason McKemie Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? That's a rumor I have heard as well. On January 21, 2015 2:27:58 PM AKST, Jason McKemie <[email protected]<mailto:[email protected]>> wrote: It's probably because they didn't originally design ePMP, just purchased it off of someone else (possibly Memorylink?) On Wed, Jan 21, 2015 at 5:26 PM, Mathew Howard <[email protected]<mailto:[email protected]>> wrote: I can only see two logical reasons that they didn't do that - either it's significantly cheaper to build an antenna in the ePMP form factor, or they purposely didn't want them to work too well with Canopy accessories... presumably to encourage people to upgrade FSK networks to 450 instead. On Wed, Jan 21, 2015 at 5:19 PM, Josh Luthman <[email protected]<mailto:[email protected]>> wrote: So you mean epmp guts put into the case they used for FSK, 430 and 450? That would make way too much sense, though... Josh Luthman Office: 937-552-2340<tel:937-552-2340> Direct: 937-552-2343<tel:937-552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jan 21, 2015 at 6:17 PM, Gino Villarini <[email protected]<mailto:[email protected]>> wrote: Sorry, epmp unit with SM like features (bracket and patch) Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com<http://www.aeronetpr.com> @aeronetpr From: Josh Luthman <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Wednesday, January 21, 2015 at 7:13 PM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? What do you mean put in "epmp like unit"? Josh Luthman Office: 937-552-2340<tel:937-552-2340> Direct: 937-552-2343<tel:937-552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jan 21, 2015 at 6:05 PM, Gino Villarini <[email protected]<mailto:[email protected]>> wrote: Josh, you are missing the whole point… I know this, but that combo dosnt yield good gain… maybe 15-16db total gain at best… also you need special adapters for it to work. We need a direct replacement, remove SM, put Epmp like unit Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com<http://www.aeronetpr.com> @aeronetpr From: Josh Luthman <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Wednesday, January 21, 2015 at 7:00 PM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? Dude you can use the 27rd or KP reflectors with EPMP. I believe the force 110 is better gain though. Josh Luthman Office: 937-552-2340<tel:937-552-2340> Direct: 937-552-2343<tel:937-552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 21, 2015 5:12 PM, "Gino Villarini" <[email protected]<mailto:[email protected]>> wrote: no Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com<http://www.aeronetpr.com> @aeronetpr On 1/21/15, 3:00 PM, "John Woodfield" <[email protected]<mailto:[email protected]>> wrote: >Can't you use an epmp integrates on the 100 dish??? > >Sent from my iPhone > >> On Jan 21, 2015, at 1:51 PM, Gino Villarini >> <[email protected]<mailto:[email protected]>> wrote: >> >> So we are migrating some our Canopy 100 to epmpŠ primarily using the >>Force110Š but I ponder, 99% of my PMP100 installs have dishesŠ >> >> Why cambium or anyone else has developed a simple bracket with a dual >>pol patch so we can put a conn. Epmp there and just swap a Canopy SM >>with this contraption???? >> >> My techs could do a swap in 5 minutes instead of 30-45 min >> >> >> >> Gino A. Villarini >> President >> Aeronet Wireless Broadband Corp. >> www.aeronetpr.com<http://www.aeronetpr.com> >> @aeronetpr >> >> -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
