Hairpin NAT. I've done it a couple times, but not enough to speak 
authoritatively. 




----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 



----- Original Message -----

From: "Mark - Myakka Technologies" <[email protected]> 
To: "af" <[email protected]> 
Sent: Thursday, March 5, 2015 4:41:24 PM 
Subject: [AFMUG] Mikrotik Dst-nat question 

I have a customer with a DVR, so we do the port forwarding thing in 
mikrotik and they can now access the DVR from the Internet all is 
good. 

However, I want to do some type of re-direct on the internal network 
so they can use the public IP on the internal network to access the 
DVR. 

This is what I tried? 

1 ;;; DVR TCP External Access (works fine) 
chain=dstnat action=dst-nat to-addresses=192.168.2.137 protocol=tcp 
in-interface=ether1 dst-port=8080,554,8000 log=no log-prefix="" 

2 X ;;; DVR TCP Internal Access (Not Working) 
chain=dstnat action=netmap to-addresses=192.168.2.137 protocol=tcp 
dst-address=199.47.xxx.yyy in-interface=Local dst-port=8080,554,8000 
log=no log-prefix="" 

Tried both netmap and dst-nat on line 2 with no luck 






-- 
Thanks, 
Mark mailto:[email protected] 

Myakka Technologies, Inc. 
www.MyakkaTech.com 

Proud Sponsor of the Myakka City Relay For Life 
http://www.RelayForLife.org/MyakkaCityFL 

Please Donate at 
https://secure.acsevents.org/site/Donation2?df_id=1011305&PROXY_ID=1645865&PROXY_TYPE=22&FR_ID=57644
 


--- 
This email is free from viruses and malware because avast! Antivirus protection 
is active. 
http://www.avast.com 


Reply via email to