Josh,Let me clarify When the customer is not home and is on a public network he will access his DVR via the public IP address 199.47.xxx.yyy. This works fine. However, if he tries to access the public IP address while he is at home, we have an issue. It doesn't work. He needs to access the DVR via the local address 192.168.2.137. In most cases this is fine if the device lives in just one space such as a desktop. It gets annoying when the device moves from space to space such as cell phone. Yes, I can put two entries in the DVR APP. But that seems like rigging it to the normal user. I would like to a nat, netmap, etc. When the user acesses 199.47.xxx.yyy from his private 192.168.2.0/24 network, it actually will access 192.168.2.137 on the private network. Ideas?
Does he have a static IP? If you base the dstnat rule on the
dst-address rather than the in-interface then it will work from both
inside and out. Obviously if he doesn't have a static IP, then it's not
practical. I'm sure there's another way, but I don't know off hand.
- [AFMUG] Mikrotik Dst-nat question Mark - Myakka Technologies
- Re: [AFMUG] Mikrotik Dst-nat question Josh Luthman
- Re: [AFMUG] Mikrotik Dst-nat question Mark - Myakka Technologies
- Re: [AFMUG] Mikrotik Dst-nat quest... Josh Luthman
- Re: [AFMUG] Mikrotik Dst-nat quest... Gabriel Pike
- Re: [AFMUG] Mikrotik Dst-nat q... Josh Luthman
- Re: [AFMUG] Mikrotik Dst-nat q... David
- Re: [AFMUG] Mikrotik Dst-... Josh Luthman
- Re: [AFMUG] Mikrotik Dst-... David
- Re: [AFMUG] Mikrotik Dst-nat question Adam Moffett
- Re: [AFMUG] Mikrotik Dst-nat question Robbie Wright
- Re: [AFMUG] Mikrotik Dst-nat question Mike Hammett
- Re: [AFMUG] Mikrotik Dst-nat question Butch Evans
- Re: [AFMUG] Mikrotik Dst-nat question Mark - Myakka Technologies
