Got it guys. hairpin nat. for some info on that in the mikrotik wiki. After fat fingering a few things and figuring out my typos, I got it working.
Thanks... -- Best regards, Mark mailto:[email protected] Myakka Technologies, Inc. www.MyakkaTech.com Proud Sponsor of the Myakka City Relay For Life http://www.RelayForLife.org/MyakkaCityFL Please Donate at http://main.acsevents.org/site/TR/RelayForLife/RFLFY12FL?team_id=1030009&pg=team&fr_id=37555 ------ Thursday, March 5, 2015, 11:30:12 PM, you wrote: >> I have a customer with a DVR, so we do the port forwarding thing in >> mikrotik and they can now access the DVR from the Internet all is >> good. >> >> However, I want to do some type of re-direct on the internal network >> so they can use the public IP on the internal network to access the >> DVR. >> >> This is what I tried? >> >> 1 ;;; DVR TCP External Access (works fine) >> chain=dstnat action=dst-nat to-addresses=192.168.2.137 protocol=tcp >> in-interface=ether1 dst-port=8080,554,8000 log=no log-prefix="" >> >> 2 X ;;; DVR TCP Internal Access (Not Working) >> chain=dstnat action=netmap to-addresses=192.168.2.137 protocol=tcp >> dst-address=199.47.xxx.yyy in-interface=Local dst-port=8080,554,8000 >> log=no log-prefix="" BE> /ip firewall nat BE> add chain=srcnat action=masquerade src-address=192.168.2.0/24 BE> dst-address=192.168.2.0/24 BE> You can specify the dst-address=192.168.2.137 if you prefer. --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com
