I have a customer with a DVR, so we do the port forwarding thing in
mikrotik and they can now access the DVR from the Internet all is
good.
However, I want to do some type of re-direct on the internal network
so they can use the public IP on the internal network to access the
DVR.
This is what I tried?
1 ;;; DVR TCP External Access (works fine)
chain=dstnat action=dst-nat to-addresses=192.168.2.137 protocol=tcp
in-interface=ether1 dst-port=8080,554,8000 log=no log-prefix=""
2 X ;;; DVR TCP Internal Access (Not Working)
chain=dstnat action=netmap to-addresses=192.168.2.137 protocol=tcp
dst-address=199.47.xxx.yyy in-interface=Local dst-port=8080,554,8000
log=no log-prefix=""
/ip firewall nat
add chain=srcnat action=masquerade src-address=192.168.2.0/24
dst-address=192.168.2.0/24
You can specify the dst-address=192.168.2.137 if you prefer.
--
Butch Evans
702-537-0979
Network Support and Engineering
http://store.wispgear.net/
http://www.butchevans.com/