Around here our competitor puts their 450s on 40 degree MTI sectors. I think it is an OOBE issue since they are not technically approved for that antenna but who am I to argue with "North America's largest fixed wireless provider"....
On Mon, Apr 13, 2015 at 5:55 PM, TJ Trout <[email protected]> wrote: > try 240 superflex > > On Mon, Apr 13, 2015 at 4:14 PM, Ken Hohhof <[email protected]> wrote: > >> Yeah, LMR240 or equivalent, and no longer than necessary. LMR400 is >> overkill, the extra length because it doesn't bend will counter the lower >> loss. And LMR195 is probably too small and high loss. >> >> Why do people not like to use the Cambium sectors with the brackets for >> the AP? Needing different beamwidth? Or trying to save a few bucks? Look >> carefully at specs when choosing sectors, esp. F/B ratio and null fill. >> >> >> -----Original Message----- From: Gilbert Gutierrez >> Sent: Monday, April 13, 2015 5:58 PM >> To: [email protected] >> Subject: Re: [AFMUG] PMP450 Cabling >> >> >> I am not using OEM sectors. I will try LMR-240. >> >> Gilbert >> >> On 4/13/2015 3:42 PM, George Skorup (Cyber Broadcasting) wrote: >> >>> Mounted on Cambium's (Laird OEM) antennas? They sell LMR-240 jumpers >>> that are the correct length (16"). >>> >>> On 4/13/2015 5:14 PM, Gilbert Gutierrez wrote: >>> >>>> I usually use LMR400 for the short run between my radio and sector. >>>> What do others use for cabling between the radio and the sector? Maybe >>>> LMR195. The jumpers I use are 1M in length and I was thinking something a >>>> bit lighter and flexible would work better. >>>> >>>> Gilbert >>>> >>> >>> >>> >>> >>> >> >> >
