From Past experience using omnis and other un-approved sectors does not
give me more it only gets me less on performance or coverage or at times
both.
By using the Approved sectors I know exactly what I am getting and where
to use it.
It saves me tons months down the road.
On 4/13/2015 6:14 PM, Ken Hohhof wrote:
Yeah, LMR240 or equivalent, and no longer than necessary. LMR400 is
overkill, the extra length because it doesn't bend will counter the
lower loss. And LMR195 is probably too small and high loss.
Why do people not like to use the Cambium sectors with the brackets
for the AP? Needing different beamwidth? Or trying to save a few
bucks? Look carefully at specs when choosing sectors, esp. F/B ratio
and null fill.
-----Original Message----- From: Gilbert Gutierrez
Sent: Monday, April 13, 2015 5:58 PM
To: [email protected]
Subject: Re: [AFMUG] PMP450 Cabling
I am not using OEM sectors. I will try LMR-240.
Gilbert
On 4/13/2015 3:42 PM, George Skorup (Cyber Broadcasting) wrote:
Mounted on Cambium's (Laird OEM) antennas? They sell LMR-240 jumpers
that are the correct length (16").
On 4/13/2015 5:14 PM, Gilbert Gutierrez wrote:
I usually use LMR400 for the short run between my radio and sector.
What do others use for cabling between the radio and the sector?
Maybe LMR195. The jumpers I use are 1M in length and I was thinking
something a bit lighter and flexible would work better.
Gilbert
--
