One question rejected and one not answered means the not answered....
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: "Ben Moore" <ben.mo...@ubnt.com> To: af@afmug.com Sent: Thursday, April 23, 2015 7:15:38 PM Subject: Re: [AFMUG] loving these AF5X's so far! No plans at this stage for white space. As for anything additional coming from AF team...They are always working on something (or many things)... On Thu, Apr 23, 2015 at 6:07 PM, Jon Langeler < jon-ispli...@michwave.net > wrote: Is multipoint in the future? white space? Sent from my iPhone On Apr 23, 2015, at 6:53 PM, Ben Moore < ben.mo...@ubnt.com > wrote: <blockquote> Thanks for the great feedback! More units will be arriving next week. Regards, Ben On Thu, Apr 23, 2015 at 4:52 PM, Jeremy < jeremysmi...@gmail.com > wrote: <blockquote> These things are amazing! I just finished converting to dual slant. 34dbi dish on one side, 30dbi dish on the other, 7.75 miles, RX -57 (all chains), 40Mhz channel width, modulation hovering between QAM16 and QAM64. Seeing 260-275Mbps down by 60Mbps up on a 75% duty cycle. The lights don't seem to work right as far as alignment goes. I spent forever fine tuning through the gui and the lights are still blinking red, one signal level. I wouldn't align with lights anyway. I am extremely impressed with these. Now if only anywhere still had them in stock.... On Sun, Apr 19, 2015 at 1:00 PM, Josh Luthman < j...@imaginenetworksllc.com > wrote: <blockquote> I'd suggest you try the upgrade. I haven't had any DFS problems outside. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sun, Apr 19, 2015 at 2:56 PM, Kurt Fankhauser < li...@wavelinc.com > wrote: <blockquote> shipped release Sent from my iPhone Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Apr 19, 2015, at 12:48 PM, Josh Luthman < j...@imaginenetworksllc.com > wrote: <blockquote> Are you on 3.0 or the shipped release? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sun, Apr 19, 2015 at 12:31 PM, Kurt Fankhauser < li...@wavelinc.com > wrote: <blockquote> Josh, I did set it while in the DFS bands and still didn't make any difference. Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Sat, Apr 18, 2015 at 10:59 PM, Josh Luthman < j...@imaginenetworksllc.com > wrote: <blockquote> Definitely set it in the DFS band! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Apr 18, 2015 10:06 PM, "Kurt Fankhauser" < li...@wavelinc.com > wrote: <blockquote> Ken, This is V/H polarity. Don't really see any need for slant on this link. I'm limited for antenna options right now anyway. But these are working great so I don't think I'm going to mess with them. Josh, No I did not set antenna gain. Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Sat, Apr 18, 2015 at 9:52 PM, Josh Reynolds < j...@spitwspots.com > wrote: <blockquote> There isn't really ATPC per say. There are some.. Similar options in 3.x firmware. Have you read Chuck's post on how the AF won't really let you "cheat" on EIRP? Has to do with distance calculations, tx power, etc. On April 18, 2015 5:05:43 PM AKDT, Josh Luthman < j...@imaginenetworksllc.com > wrote: <blockquote> The EIRP is messed up unless the ATPC brought mine down to to -60. I've got it at 25eirp with 19dbi antenna. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Apr 18, 2015 8:58 PM, "Mathew Howard" < mhoward...@gmail.com > wrote: <blockquote> looks to me like the antenna gain is at 0db, since it's saying it's limiting it to 15dbm EIRP... not that it actually makes any difference, since the TX power is going to be at 15dbm either way... it'll just be showing 38 on the interface. On Sat, Apr 18, 2015 at 7:54 PM, Josh Luthman < j...@imaginenetworksllc.com > wrote: <blockquote> Did you set 23dbi gain? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Apr 18, 2015 8:40 PM, "Kurt Fankhauser" < li...@wavelinc.com > wrote: <blockquote> First link up. Havn't even fine tuned anything yet. ARC panels on both ends. Initially tried to use DFS freqs and kept getting radar detect. Even though I was 50mhz away from anything else 5ghz on the same tower. Pretty sure the radar detection was coming from itself because it would pass the initial bootup listen period and once it started transmitting would then get the detections. So don't know what that was about. Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 </blockquote> </blockquote> </blockquote> -- Sent from my Android device with K-9 Mail. Please excuse my brevity. </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> </blockquote>
