There is an excellent section with full details on the little manual that comes with the Airfber on the recommended configuration for co-location .
:) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net ----- Original Message ----- > From: "Andreas Wiatowski" <andr...@silowireless.com> > To: af@afmug.com > Sent: Wednesday, May 13, 2015 8:46:37 PM > Subject: [AFMUG] Airfiber 24 weird issue > We have 2 Airfiber 24’s co-located on a building rooftop… they have about > 15ft horizontal separation. The one air fibre pair is aimed at a tower about > 1KM away and not the tower side we are about 75ft in the air. The other > Airfiber is located on a building across the road at the same height. The > azimuth is about 15 degrees off of each other. The link from roof to tower, > works 100%. The link from building to building is about 400ft away and we > are having weird issues getting it to link. Is there some sort of > co-location magic to make this work? I read somewhere that we should have > master or slave mode matching at the co-located sites. > Any words of wisdom are appreciated. > -Andreas > --