gps only works in tdd, and yes it works perfectly
Josh Reynolds
CIO, SPITwSPOTS
www.spitwspots.com
On 05/13/2015 04:56 PM, Andreas Wiatowski wrote:
Out of curiosity…should I be turning on GPS timing? Does it even work?
--
From: Josh Reynolds
Reply-To: "af@afmug.com <mailto:af@afmug.com>"
Date: Wednesday, May 13, 2015 at 8:49 PM
To: "af@afmug.com <mailto:af@afmug.com>"
Subject: Re: [AFMUG] Airfiber 24 weird issue
Make both airfibers on the shared rooftop masters, with reversed
tx/rx. I think the most we have at one location is 4, and there is no
more than 10 feet from end to end of the structure. They are on
slightly different azimuths.
Josh Reynolds
CIO, SPITwSPOTS
www.spitwspots.com
On 05/13/2015 04:46 PM, Andreas Wiatowski wrote:
We have 2 Airfiber 24’s co-located on a building rooftop… they have
about 15ft horizontal separation. The one air fibre pair is aimed at
a tower about 1KM away and not the tower side we are about 75ft in
the air. The other Airfiber is located on a building across the road
at the same height. The azimuth is about 15 degrees off of each
other. The link from roof to tower, works 100%. The link from
building to building is about 400ft away and we are having weird
issues getting it to link. Is there some sort of co-location magic
to make this work? I read somewhere that we should have master or
slave mode matching at the co-located sites.
Any words of wisdom are appreciated.
-Andreas
--