You can run at the higher Modulation types with TKIP this is not a UBNT
only thing most 802.11 hardware requires you to have AES to get them.
On 6/2/2015 9:48 AM, Jeremy wrote:
The newer production firmwares don't allow it either. WPA2-AES
offloads the encryption to a dedicated processor or something like
that, so it does not affect the performance of the radio. It seems
like that is what I read. We use it on all of our links anyway so it
wasn't a change for us.
On Tue, Jun 2, 2015 at 8:17 AM, Colin Stanners <[email protected]
<mailto:[email protected]>> wrote:
Downgrade firmware, or I'm pretty sure you need to drive to the
other end (or use a backup link) to change it.
Don't use beta firmware on production links... (I understand using
beta firmware is often required to get the cheap Ubiquiti
equipment working well, but that's another discussion).
On Tue, Jun 2, 2015 at 9:14 AM, That One Guy /sarcasm
<[email protected] <mailto:[email protected]>> wrote:
does anybody know a trick to get a radio set to client that is
using wpa2-tkip to connect to this AP that will only do none,
wpa-aes and wpa2-aes. I dont know why the link was set up
tkip, but apparently this beta firmware wont let you use it
On Tue, Jun 2, 2015 at 8:58 AM, That One Guy /sarcasm
<[email protected] <mailto:[email protected]>>
wrote:
Please select a valid "Wireless Security. Weak wireless
security (WEP, WPA-TKIP, WPA2-TKIP) is not supported any
more"
nice thing to have pop up on a production backhaul that
just powercycled. im assuming the link didnt come back up
on this old link because its not transmitting?
--
If you only see yourself as part of the team but
you don't see your team as part of yourself you
have already failed as part of the team.
--
If you only see yourself as part of the team but you don't see
your team as part of yourself you have already failed as part
of the team.
