Re: [AFMUG] Cambium discontinuing the traditional wall wart powersupply

[Adam Moffett]

Ok, but did you actually have a problem caused by it not being connected 
to ground?  The whole system was floating.
It has no ground for shielding whatsoever. EOL was a good call.

Andy Trimmell
Systems Engineer
Precision Data Solutions, LLC
Mooresville, IN 46158
317-831-3000 ext 211
www.pdsconnect.me



-----Original Message-----
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof
Sent: Friday, June 05, 2015 10:50 AM
To: af@afmug.com
Subject: Re: [AFMUG] Cambium discontinuing the traditional wall wart powersupply

I never used it anyway, prefer Tycon POE-24iR-CI.  And yes, a patch cord, but 
those come in various lengths and colors rather than the short little stub 
which is limiting.


-----Original Message-----
From: Mark Radabaugh
Sent: Friday, June 05, 2015 9:37 AM
To: af@afmug.com
Subject: [AFMUG] Cambium discontinuing the traditional wall wart power supply

So is anyone else unhappy with Cambium’s decision to EOL the traditional power 
supply?

The replacement part is a Ubiquiti or ePMP brick style.   It costs more,
does not include the power cord, and requires an additional CAT5 jumper cable.

While the current supply has it’s issues (hard to plug into a power strip) it’s 
simple to troubleshoot over the phone with a customer with limited ways
to screw it up.   I think this is going to create more ‘miswire’ service
calls.


Mark