Matt,
When are we going to start seeing some love for the CMM4 Rackmount
units to go to GigE and possibly some snmp feed back for
voltage,wattage and temp
I would like to see a 16 port CMM if possible for larger sites
Dave
On 06/19/2015 12:58 PM, Matt Mangriotis wrote:
85009325001
(That’s the Cambium part number)
Matt
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Tushar Patel
*Sent:* Friday, June 19, 2015 12:51 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] Gtek Communications deploys PMP 450
Which "60" degree sector antenna would you suggest we use for such
deployment?
Tushar
On Jun 19, 2015, at 11:25 AM, Matt Mangriotis
<matt.mangrio...@cambiumnetworks.com
<mailto:matt.mangrio...@cambiumnetworks.com>> wrote:
Absolutely you can do this Ken… the PMP 450 radio has much better
adjacent channel rejection and the “90” can be used in ABCABC fashion.
For even more bandwidth -- If you have enough frequency (and a
couple of CMMs), you could even use the “60” degree antenna in an
8-sector deployment, using ABCDABCD. (If they’re contiguous
channels, you’d be better off with ACBDACBD, so the frequencies
are spaced apart a bit).
Matt
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Ken Hohhof
*Sent:* Friday, June 19, 2015 11:14 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] Gtek Communications deploys PMP 450
Am I the only one who actually uses the Cambium sector antennas?
Nothing against KPP, I’m just not sure what the difference is.
Price? Availability? Or ease of swapping out the AP without
touching the sector?
I wonder in this case since it’s a 6 AP cluster, was it to use
narrower sectors? We just did a 6 AP tower and used the “90
degree” sectors (65 degrees at 3 dB points) with ABCABC frequency
reuse. Cambium used to say this was a no-no but I think they
revised this quite awhile ago and said it was fine.
*From:*Josh Luthman <mailto:j...@imaginenetworksllc.com>
*Sent:*Friday, June 19, 2015 10:59 AM
*To:*af@afmug.com <mailto:af@afmug.com>
*Subject:*Re: [AFMUG] Gtek Communications deploys PMP 450
No mention of WB for the hardware to make that setup possible?!
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Jun 19, 2015 at 11:56 AM, Ray Savich
<ray.sav...@cambiumnetworks.com
<mailto:ray.sav...@cambiumnetworks.com>> wrote:
Justin Aragon shares details of his network covering South
Texas at http://bit.ly/1FrijiD .
Ray
Join the Conversation
Cambium Networks Community Forum
<http://community.cambiumnetworks.com/>
