Frak, must still have an old Cyclone up there. I swapped out a backhaul radio and radioed to the ground to have them swap from UBNT to Cambium PoE. The link light was flashing when the previous radio didn't have an Ethernet issue. Left the site because the city was there to close it up. Went back today to try to sort it out. Spent most of the time I was at the site figuring out why radios were plugged into wrong PoEs across the board. City came to close up the site before I tracked down the original problem. For another day...
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: "Sean Heskett" <af...@zirkel.us> To: af@afmug.com Sent: Monday, July 6, 2015 3:12:52 PM Subject: Re: [AFMUG] ePMP no pings Anything cambium except epmp at the orthagon PTP stuff So either FSK, 430 & 450 gear On Monday, July 6, 2015, Mike Hammett < af...@ics-il.net > wrote: Like anything Cambium or are you meaning old school Canopy like 100, 450, etc.? ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: "Sean Heskett" < af...@zirkel.us > To: af@afmug.com Sent: Monday, July 6, 2015 2:46:41 PM Subject: Re: [AFMUG] ePMP no pings 0A:00:3E is canopy hardware On Mon, Jul 6, 2015 at 1:35 PM, Mike Hammett < af...@ics-il.net > wrote: <blockquote> Anyone recognize these MACs on ether3? That OUI isn't in the IEEE OUI list, so it's not a real, hardware address. [admin@Yorkville Grande Reserve] > /interface bridge host print Flags: L - local, E - external-fdb BRIDGE MAC-ADDRESS ON-INTERFACE AGE L Local 00:0C:42:75:D7:70 ether1 - Local 0s L Local 00:0C:42:75:D7:72 ether3 0s Local 00:26:B9:D6:61:02 ether1 - Local 0s Local 0A:00:3E:03:5B:96 ether3 20s Local 0A:00:3E:04:6B:5A ether3 1m6s Production isn't bridged, just sitting here for testing at the moment. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: "Mike Hammett" < af...@ics-il.net > To: af@afmug.com Sent: Monday, July 6, 2015 2:16:33 PM Subject: Re: [AFMUG] ePMP no pings Down to just one. One of them apparently wasn't upgraded to 2.1 or beyond yet (2.0) and had the old GUI and IP. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: "Mike Hammett" < af...@ics-il.net > To: "Animal Farm" < af@afmug.com > Sent: Monday, July 6, 2015 1:13:14 PM Subject: [AFMUG] ePMP no pings Any of you had any issues with Cambium radios coming up, but not responding to pings? I tried 169.254.1.1, 192.168.0.1 and 192.168.0.2. These are all newer than the migration to 169.254. I seem to have three radios on a tower doing that. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com </blockquote>
