Those customers don't need service anyway.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Jul 6, 2015 5:09 PM, "Mike Hammett" <af...@ics-il.net> wrote:

> Frak, must still have an old Cyclone up there. I swapped out a backhaul
> radio and radioed to the ground to have them swap from UBNT to Cambium PoE.
> The link light was flashing when the previous radio didn't have an Ethernet
> issue. Left the site because the city was there to close it up. Went back
> today to try to sort it out. Spent most of the time I was at the site
> figuring out why radios were plugged into wrong PoEs across the board. City
> came to close up the site before I tracked down the original problem. For
> another day...
>
>
>
> -----
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
> ------------------------------
> *From: *"Sean Heskett" <af...@zirkel.us>
> *To: *af@afmug.com
> *Sent: *Monday, July 6, 2015 3:12:52 PM
> *Subject: *Re: [AFMUG] ePMP no pings
>
> Anything cambium except epmp at the orthagon PTP stuff
>
> So either FSK, 430 & 450 gear
>
> On Monday, July 6, 2015, Mike Hammett <af...@ics-il.net> wrote:
>
>> Like anything Cambium or are you meaning old school Canopy like 100, 450,
>> etc.?
>>
>>
>>
>> -----
>> Mike Hammett
>> Intelligent Computing Solutions
>> http://www.ics-il.com
>>
>> ------------------------------
>> *From: *"Sean Heskett" <af...@zirkel.us>
>> *To: *af@afmug.com
>> *Sent: *Monday, July 6, 2015 2:46:41 PM
>> *Subject: *Re: [AFMUG] ePMP no pings
>>
>> 0A:00:3E is canopy hardware
>>
>> On Mon, Jul 6, 2015 at 1:35 PM, Mike Hammett <af...@ics-il.net> wrote:
>>
>>> Anyone recognize these MACs on ether3? That OUI isn't in the IEEE OUI
>>> list, so it's not a real, hardware address.
>>>
>>>
>>> [admin@Yorkville Grande Reserve] > /interface bridge host print
>>> Flags: L - local, E - external-fdb
>>>   BRIDGE
>>> MAC-ADDRESS
>>> ON-INTERFACE
>>> AGE
>>> L Local
>>> 00:0C:42:75:D7:70 ether1 -
>>> Local
>>> 0s
>>> L Local
>>> 00:0C:42:75:D7:72
>>> ether3
>>> 0s
>>>   Local
>>> 00:26:B9:D6:61:02 ether1 -
>>> Local
>>> 0s
>>>   Local
>>> 0A:00:3E:03:5B:96
>>> ether3
>>> 20s
>>>   Local
>>> 0A:00:3E:04:6B:5A
>>> ether3
>>> 1m6s
>>>
>>>
>>>
>>> Production isn't bridged, just sitting here for testing at the moment.
>>>
>>>
>>>
>>> -----
>>> Mike Hammett
>>> Intelligent Computing Solutions
>>> http://www.ics-il.com
>>>
>>> ------------------------------
>>> *From: *"Mike Hammett" <af...@ics-il.net>
>>> *To: *af@afmug.com
>>> *Sent: *Monday, July 6, 2015 2:16:33 PM
>>> *Subject: *Re: [AFMUG] ePMP no pings
>>>
>>> Down to just one. One of them apparently wasn't upgraded to 2.1 or
>>> beyond yet (2.0) and had the old GUI and IP.
>>>
>>>
>>>
>>> -----
>>> Mike Hammett
>>> Intelligent Computing Solutions
>>> http://www.ics-il.com
>>>
>>> ------------------------------
>>> *From: *"Mike Hammett" <af...@ics-il.net>
>>> *To: *"Animal Farm" <af@afmug.com>
>>> *Sent: *Monday, July 6, 2015 1:13:14 PM
>>> *Subject: *[AFMUG] ePMP no pings
>>>
>>> Any of you had any issues with Cambium radios coming up, but not
>>> responding to pings? I tried 169.254.1.1, 192.168.0.1 and 192.168.0.2.
>>> These are all newer than the migration to 169.254. I seem to have three
>>> radios on a tower doing that.
>>>
>>>
>>>
>>> -----
>>> Mike Hammett
>>> Intelligent Computing Solutions
>>> http://www.ics-il.com
>>>
>>>
>>>
>>
>>
>

Reply via email to