But the bracket uses a hose clamp... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jul 7, 2015 5:28 PM, "Mathew Howard" <mhoward...@gmail.com> wrote:
> apparently he's anti-hose clamp. > > On Tue, Jul 7, 2015 at 4:26 PM, Josh Luthman <j...@imaginenetworksllc.com> > wrote: > >> What's the point of that? The af5x and Rocket can already use a hose >> clamp. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Jul 7, 2015 5:24 PM, "Ken Hohhof" <af...@kwisp.com> wrote: >> >>> There are tabs to latch it where? Are you assuming I am using a >>> Ubiquiti dish? These are Radiowaves dishes (2 ft at one end, 3 ft at the >>> other) that are already on the tower. >>> >>> Should I be looking at something like this? >>> >>> http://www.balticnetworks.com/rf-elements-easybracket-s-brocket-wall-pole-mount-for-ubiquiti-rockets-and-unifi-outdoor-series.html >>> >>> >>> *From:* Josh Luthman <j...@imaginenetworksllc.com> >>> *Sent:* Tuesday, July 07, 2015 4:01 PM >>> *To:* af@afmug.com >>> *Subject:* Re: [AFMUG] mounting AF5X to tower (non UBNT dish) >>> >>> >>> Jeremy put it right on the dish. There are tabs to latch it, but I like >>> his idea of only using the two and longer jumpers. This leaves room for >>> the GPS connector. >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> On Jul 7, 2015 4:54 PM, "Ken Hohhof" <af...@kwisp.com> wrote: >>> >>>> What have people been doing to mount the AF5X radio when using a >>>> generic, non Ubiquiti dish? So there is no Rocket bracket to clip it to? >>>> In this case I am replacing some old Trango 5010 PTP radios and using the >>>> existing Radiowaves dishes. >>>> >>>> There's a place on the back of the radio that you could pass a >>>> hoseclamp through, but that doesn't seem right, especially since the ground >>>> screw sticks out too far for that to work well. >>>> >>>> Photos anyone? >>>> >>>> >