I've heard twice now weirdness with that voltage reading. Both in the last week. I haven't had a chance to get it on the bench to test.
I'm guessing that I'm reading the wrong adc input somehow. On Aug 18, 2015 4:00 PM, "George Skorup" <[email protected]> wrote: > Not to get off topic here, but the two 5ch PDUs I just got show 35.5-ish > volts on the master input... with no supply connected. And the status LED > doesn't flash like it normally would if it sees no/low voltage on the > master. Seems strange. Are these bad or should I just not worry about it? > They were both showing that before and after I updated the firmware, BTW. I > only have one other one from months ago for a mockup that I never ended up > using and it acts normally. It shows like 1.2 volts on the input with > nothing feeding it and the status LED does flash 5 or 6 times. > > On 8/18/2015 4:54 PM, Forrest Christian (List Account) wrote: > > If you've bought at least 25, yes. > > I'm in classes all this week, and wasn't feeling well last night so I > shirked my ticket duties last night. > > I'll try to get back to you tonight after classes. > On Aug 18, 2015 2:25 PM, "Adam Moffett" <[email protected]> wrote: > >> So....I've bought half the units sold? >> You should look for my email to custsvc from yesterday. I would be >> looking for 60 units at neg48. >> >> >> >> On 8/18/2015 5:11 PM, Forrest Christian (List Account) wrote: >> >> The pdu was designed to be able to be built for neg48 as well, but >> relies on expansion bus power to power it. This means that if you reboot >> the base unit, the pdu and the devices attached to it will also reboot. >> There are some messy ways we can bring this power in to avoid this. >> >> Because of this, we've never officially released the neg48 version of >> this. Eventually my intent is to add an additional circuit to fix this, >> but since we've shipped less than 50 of these it isn't a high priority. >> >> So, If you want a couple which do neg48 we can build them since it's just >> a couple of part swaps . Probably would need a week or two. >> I like the packetflux PDU, but I need to switch -48 loads. Does anybody >> have any suggestions? >> >> Forrest.....if you make it I will buy it. >> >> >> >
