IIRC, no new UBNT products have DFS certification. Some of the newer ones (Maybe all?) have 5150 certification.
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com ----- Original Message ----- From: "Faisal Imtiaz" <fai...@snappytelecom.net> To: af@afmug.com Cc: "Principal WISPA Member List" <w...@wispa.org>, memb...@wispa.org Sent: Sunday, August 23, 2015 3:39:33 PM Subject: Re: [AFMUG] Cambium ePMP Feedback Hi Darin, Comparing Ubnt AC to EPMP ... it is not a fair, apples to apples comparison.. one is a 802.11ac based and the other is 802.11n based system. in regards to certs... actually, both are now certified for all of the bands... EPMP is available for use today, Ubnt AC products, awaiting a new firmware to unlock the channels. ><I'm most interested in how ePMP scales on towers compared to UBNT If you are feq. constrained, the re-use of freq with EPMP will be highly desired. If you are not freq. constrained then ability to do higher bandwidth with the AC products will be appealing. >>>how it handles a low signal client better than UBNT when a dish gets >>>misaligned For all systems, irrespective of who makes them... the key factor is Signal to Noise Ratio... if that is decent stuff will work well, if not then they all come down to their knees.... How much and how quickly....would be very difficult to describe....(kind of like asking someone what does a rose smell like ?) >>>Consistent jitter and ping is also something I'd be interested in hearing >>>about to see how it handles VOIP and gaming better than UBNT. On any GPS based system, you will have a higher ping time....(latency) EPMP's have a very decent QOS mechanism, and voip works well . Ubnt works pretty decent too. However as a general rule.... non gps based systems are more susceptible to interference... but then keep in mind that is a relative statement, depending on the strength of the interfering signal, even the gps based units will come down to their knees. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net ----- Original Message ----- From: "Darin Steffl" <darin.ste...@mnwifi.com> To: af@afmug.com, "memb...@wispa.org" <memb...@wispa.org>, "Principal WISPA Member List" <w...@wispa.org> Sent: Sunday, August 23, 2015 1:52:40 PM Subject: [AFMUG] Cambium ePMP Feedback <blockquote> Hello guys, Have any of you used Ubiquiti M-Series and also used ePMP now to compare the differences in your network? We're building out some new sites and comparing Ubiquiti AC gear to ePMP and really would like to hear some more recent feedback on the ePMP platform since it always seems like it isn't talked about much on the list or in the forums. I know ePMP is fully certified for all bands while Ubiquiti is still only certified and running in the upper bands, except for beta which now has UNII-1 as well. I'm most interested in how ePMP scales on towers compared to UBNT and how it handles a low signal client better than UBNT when a dish gets misaligned. Consistent jitter and ping is also something I'd be interested in hearing about to see how it handles VOIP and gaming better than UBNT. Any feedback would be great. Thanks -- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi Like us on Facebook </blockquote>
