That's what I thought... so it seems like it's going to be awhile before there's a replacement for the 110.
On Tue, Sep 8, 2015 at 4:35 PM, Josh Luthman <[email protected]> wrote: > Force 180 is no dish. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Sep 8, 2015 5:34 PM, "Mathew Howard" <[email protected]> wrote: > >> I see some places have the Force 200 and the Force 180 listed now, so I'm >> guessing it won't be too much longer. but... the Force 200 seems to only be >> 2.4ghz, and I have figured out what exactly the 180 is yet. >> >> On Tue, Sep 8, 2015 at 4:30 PM, Nate Burke <[email protected]> wrote: >> >>> When will this magical new dish be out? Will it keep my installers from >>> Swearing while assembling them? Can it be installed by Drone? I can just >>> program the drone and release it from the roof of my office to go do the >>> install? >>> >>> >>> On 9/8/2015 4:26 PM, Josh Luthman wrote: >>> >>> It'll be a new part entirely. >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> On Sep 8, 2015 5:24 PM, "Nate Burke" <[email protected]> wrote: >>> >>>> Do the new dishes have a new part number? Or just what you get from >>>> distributors as they go through stock? >>>> >>>> >>>> On 9/8/2015 4:05 PM, Josh Luthman wrote: >>>> >>>> They already know about the hardware, the new Force dishes are much >>>> much better. As far as current stuff I don't know... >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> On Sep 8, 2015 5:00 PM, "Jaime Solorza" <[email protected]> >>>> wrote: >>>> >>>>> Can you replace parts with hot dipped galvanized ones instead? BTW >>>>> what is Force EPMP ? >>>>> On Sep 8, 2015 2:54 PM, "Nate Burke" <[email protected]> wrote: >>>>> >>>>>> We've had to start doing our first couple EPMP takedowns (Force >>>>>> dishes), and it seems that the stainless nuts have seized on. >>>>>> >>>>>> Should we be hitting all installs with Anti-Seize, or would we be >>>>>> better off just replacing the hardware with brass/bronze nuts ala LMG? >>>>>> I haven't used Anti-Seize before, is it a sticky mess to work with? >>>>>> Would the installers actually use it, or just screw over the guy that >>>>>> gets >>>>>> sent to de-install? I'm also thinking about how to easy it would be >>>>>> to >>>>>> re-deploy the Force Dishes. >>>>>> >>>>>> Nate >>>>>> >>>>> >>>> >>> >>
