I see some places have the Force 200 and the Force 180 listed now, so I'm guessing it won't be too much longer. but... the Force 200 seems to only be 2.4ghz, and I have figured out what exactly the 180 is yet.
On Tue, Sep 8, 2015 at 4:30 PM, Nate Burke <n...@blastcomm.com> wrote: > When will this magical new dish be out? Will it keep my installers from > Swearing while assembling them? Can it be installed by Drone? I can just > program the drone and release it from the roof of my office to go do the > install? > > > On 9/8/2015 4:26 PM, Josh Luthman wrote: > > It'll be a new part entirely. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Sep 8, 2015 5:24 PM, "Nate Burke" <n...@blastcomm.com> wrote: > >> Do the new dishes have a new part number? Or just what you get from >> distributors as they go through stock? >> >> >> On 9/8/2015 4:05 PM, Josh Luthman wrote: >> >> They already know about the hardware, the new Force dishes are much much >> better. As far as current stuff I don't know... >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Sep 8, 2015 5:00 PM, "Jaime Solorza" <losguyswirel...@gmail.com> >> wrote: >> >>> Can you replace parts with hot dipped galvanized ones instead? BTW >>> what is Force EPMP ? >>> On Sep 8, 2015 2:54 PM, "Nate Burke" <n...@blastcomm.com> wrote: >>> >>>> We've had to start doing our first couple EPMP takedowns (Force >>>> dishes), and it seems that the stainless nuts have seized on. >>>> >>>> Should we be hitting all installs with Anti-Seize, or would we be >>>> better off just replacing the hardware with brass/bronze nuts ala LMG? >>>> I haven't used Anti-Seize before, is it a sticky mess to work with? >>>> Would the installers actually use it, or just screw over the guy that gets >>>> sent to de-install? I'm also thinking about how to easy it would be to >>>> re-deploy the Force Dishes. >>>> >>>> Nate >>>> >>> >> >
