Assuming it's not regulated? 54 seems odd, sure it isn't 56? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 9, 2015 11:30 AM, "Josh Baird" <joshba...@gmail.com> wrote:
> Stock is 50V. I'm running them directly off a Traco TSP (~54V). I wonder > if this is why the ethernet keeps dropping. > > On Wed, Sep 9, 2015 at 11:27 AM, Mathew Howard <mhoward...@gmail.com> > wrote: > >> The stock AF24 power supply is 50v, if I remember correctly. >> >> On Wed, Sep 9, 2015 at 9:37 AM, Josh Luthman <j...@imaginenetworksllc.com >> > wrote: >> >>> Isn't AF24 only 48v? >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Wed, Sep 9, 2015 at 10:33 AM, Chuck McCown <ch...@wbmfg.com> wrote: >>> >>>> OK, there are some half watt resistors in that area. When running at >>>> 55 volts limiting current for the LEDs they do get hot. Their temp depends >>>> on system voltage. I had hard to make the LEDs usable for a range of 6-60 >>>> volts without some tradeoff. >>>> >>>> As long as the large chip isn’t getting hot you are OK. >>>> >>>> *From:* Josh Baird <joshba...@gmail.com> >>>> *Sent:* Wednesday, September 09, 2015 8:16 AM >>>> *To:* af@afmug.com >>>> *Subject:* Re: [AFMUG] GIGE-POE-APC Hot? >>>> >>>> Yeah, it seems to be just the area around the LED. The connector is >>>> not very hot at all. >>>> >>>> On Wed, Sep 9, 2015 at 9:54 AM, Nate Burke <n...@blastcomm.com> wrote: >>>> >>>>> Or is it the area right by the LED's? >>>>> >>>>> On 9/9/2015 8:52 AM, Ken Hohhof wrote: >>>>> >>>>> The connector is hot? That can’t be right. >>>>> >>>>> *From:* Josh Baird <joshba...@gmail.com> >>>>> *Sent:* Wednesday, September 09, 2015 8:43 AM >>>>> *To:* af@afmug.com >>>>> *Subject:* [AFMUG] GIGE-POE-APC Hot? >>>>> >>>>> We just installed our first GIGE-POE-APC which is powering an AF24, >>>>> and noticed that it gets VERY hot. So hot that it almost instantly burns >>>>> your finger when you touch the green molding. For folks that have these >>>>> installed, is this normal? >>>>> >>>>> It's ran fine for a few days, but this morning we we noticed that the >>>>> ethernet link on the AF24 was dropping (and coming back very quickly). >>>>> I'm >>>>> not sure if it's related or not. >>>>> >>>>> Josh >>>>> >>>>> >>>>> >>>> >>> >>> >> >
