It's not. ~53 right now (see attachment). Oddly enough, the ethernet link did not drop for a couple days.
On Wed, Sep 9, 2015 at 11:38 AM, Josh Luthman <j...@imaginenetworksllc.com> wrote: > Assuming it's not regulated? 54 seems odd, sure it isn't 56? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Sep 9, 2015 11:30 AM, "Josh Baird" <joshba...@gmail.com> wrote: > >> Stock is 50V. I'm running them directly off a Traco TSP (~54V). I >> wonder if this is why the ethernet keeps dropping. >> >> On Wed, Sep 9, 2015 at 11:27 AM, Mathew Howard <mhoward...@gmail.com> >> wrote: >> >>> The stock AF24 power supply is 50v, if I remember correctly. >>> >>> On Wed, Sep 9, 2015 at 9:37 AM, Josh Luthman < >>> j...@imaginenetworksllc.com> wrote: >>> >>>> Isn't AF24 only 48v? >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Wed, Sep 9, 2015 at 10:33 AM, Chuck McCown <ch...@wbmfg.com> wrote: >>>> >>>>> OK, there are some half watt resistors in that area. When running at >>>>> 55 volts limiting current for the LEDs they do get hot. Their temp >>>>> depends >>>>> on system voltage. I had hard to make the LEDs usable for a range of 6-60 >>>>> volts without some tradeoff. >>>>> >>>>> As long as the large chip isn’t getting hot you are OK. >>>>> >>>>> *From:* Josh Baird <joshba...@gmail.com> >>>>> *Sent:* Wednesday, September 09, 2015 8:16 AM >>>>> *To:* af@afmug.com >>>>> *Subject:* Re: [AFMUG] GIGE-POE-APC Hot? >>>>> >>>>> Yeah, it seems to be just the area around the LED. The connector is >>>>> not very hot at all. >>>>> >>>>> On Wed, Sep 9, 2015 at 9:54 AM, Nate Burke <n...@blastcomm.com> wrote: >>>>> >>>>>> Or is it the area right by the LED's? >>>>>> >>>>>> On 9/9/2015 8:52 AM, Ken Hohhof wrote: >>>>>> >>>>>> The connector is hot? That can’t be right. >>>>>> >>>>>> *From:* Josh Baird <joshba...@gmail.com> >>>>>> *Sent:* Wednesday, September 09, 2015 8:43 AM >>>>>> *To:* af@afmug.com >>>>>> *Subject:* [AFMUG] GIGE-POE-APC Hot? >>>>>> >>>>>> We just installed our first GIGE-POE-APC which is powering an AF24, >>>>>> and noticed that it gets VERY hot. So hot that it almost instantly burns >>>>>> your finger when you touch the green molding. For folks that have these >>>>>> installed, is this normal? >>>>>> >>>>>> It's ran fine for a few days, but this morning we we noticed that the >>>>>> ethernet link on the AF24 was dropping (and coming back very quickly). >>>>>> I'm >>>>>> not sure if it's related or not. >>>>>> >>>>>> Josh >>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> >>> >>
