Thanks,

The APs are running 12.2.2 but a lot of the SMs are running 13.2.1 with no
issues.  We need to upgrade the APs anyway, so we will move the APs to
13.2.1 and see if the 450ds work then.

On Tue, Oct 6, 2015 at 12:17 PM, Steve Utick <sut...@gmail.com> wrote:

> However, be aware that if you have other SM's on that AP, you will need to
> update all of them to 13.2.1 BEFORE you update the AP, or they won't
> associate.
>
> It's all documented in the release notes for 13.2.1.
>
>
> On Tue, Oct 6, 2015 at 10:14 AM, Sean Heskett <af...@zirkel.us> wrote:
>
>> They changed some of the frame timing around build 13.x so anything
>> earlier is pretty squirrelly or just won't work.
>>
>> Upgrade the AP to 13.2.1
>>
>>
>>
>> On Tuesday, October 6, 2015, Carl Peterson <cpeter...@portnetworks.com>
>> wrote:
>>
>>> Is there an issue with 13.3 SMs on 12.2.2 APs?  We are testing the 450d
>>> and it looks like it is connecting but really isn't.
>>>
>>> Any chance this is a polarity issue?  All of our dished SMs are
>>> connecting fine.  I seem to remember an issue with some 450APs having H and
>>> V swapped internally.
>>>
>>> LUID: 037 - [0a-00-3e-xx-xx-xx]
>>> <http://10.13.39.140:1080/?mac_esn=0a003eb29e8a> State: IN SESSION
>>> (Encrypt Disabled)
>>>       Site Name: NAME
>>>       PMP 450 MIMO OFDM
>>>       Software Version: CANOPY 13.3
>>>       FPGA Version: 112414 (DES, Sched, US/ETSI) P11
>>>       Session Timeout: 0, AirDelay: 2950 ns, 29 bits (approximately
>>> 0.274 miles (1449 feet))
>>>       Session Count: 4, Reg Count: 4, Re-Reg Count: 0, Session Uptime:
>>> 24 d, 21:26:07
>>>       Power Level : -54.2 dBm  Signal Strength Ratio : 7.0 dB V - H dB
>>>       Signal to Noise Ratio: 14 dB V / 0 dB H
>>>       Sustained Uplink Data Rate (AP): 65000 (kbps)
>>>       Uplink Burst Allocation (AP): 2500000 (kbit)
>>>       Sustained Downlink Data Rate (AP): 65000 (kbps)
>>>       Downlink Burst Allocation (AP): 2500000 (kbit)
>>>       Broadcast/Multicast Allocation (AP): 50000 (kbit)
>>>       Max Burst Uplink Rate (D): 0 (kbit)
>>>       Max Burst Downlink Rate (AP): 0 (kbit)
>>>       Low Priority Uplink CIR (D): 0 (kbps)
>>>       Low Priority Downlink CIR (D)
>>>
>>
>


-- 

Carl Peterson

*PORT NETWORKS*

401 E Pratt St, Ste 2553

Baltimore, MD 21202

(410) 637-3707

Reply via email to