Doh. Anyone from Cambium want to chime in on the scope of the manufacturing issue?
FYI, We installed one today on an AP running 13.2.1.3 and it seems to work fine but the aim tool isn't working. SM running 13.3 out of the box. Is there an issue with the aim tone on these? On Tue, Oct 6, 2015 at 6:10 PM, George Skorup <geo...@cbcast.com> wrote: > Uh oh? > > http://community.cambiumnetworks.com/t5/PMP-450/450d-losing-sync/td-p/45012 > > > On 10/6/2015 2:41 PM, David wrote: > > Yeah, better move to 13.2 I have no issues with it across 14 of our sites. > > > On 10/06/2015 10:59 AM, Brian Sullivan wrote: > > 13.1.2 and above brings a lot of needed performance, I would upgrade at > least to that. > > > On 10/6/2015 10:41 AM, Carl Peterson wrote: > > Is there an issue with 13.3 SMs on 12.2.2 APs? We are testing the 450d > and it looks like it is connecting but really isn't. > > Any chance this is a polarity issue? All of our dished SMs are connecting > fine. I seem to remember an issue with some 450APs having H and V swapped > internally. > > LUID: 037 - [0a-00-3e-xx-xx-xx] > <http://10.13.39.140:1080/?mac_esn=0a003eb29e8a> State: IN SESSION > (Encrypt Disabled) > Site Name: NAME > PMP 450 MIMO OFDM > Software Version: CANOPY 13.3 > FPGA Version: 112414 (DES, Sched, US/ETSI) P11 > Session Timeout: 0, AirDelay: 2950 ns, 29 bits (approximately 0.274 > miles (1449 feet)) > Session Count: 4, Reg Count: 4, Re-Reg Count: 0, Session Uptime: 24 > d, 21:26:07 > Power Level : -54.2 dBm Signal Strength Ratio : 7.0 dB V - H dB > Signal to Noise Ratio: 14 dB V / 0 dB H > Sustained Uplink Data Rate (AP): 65000 (kbps) > Uplink Burst Allocation (AP): 2500000 (kbit) > Sustained Downlink Data Rate (AP): 65000 (kbps) > Downlink Burst Allocation (AP): 2500000 (kbit) > Broadcast/Multicast Allocation (AP): 50000 (kbit) > Max Burst Uplink Rate (D): 0 (kbit) > Max Burst Downlink Rate (AP): 0 (kbit) > Low Priority Uplink CIR (D): 0 (kbps) > Low Priority Downlink CIR (D) > > > > > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
