Yeah, better move to 13.2 I have no issues with it across 14 of our sites.
On 10/06/2015 10:59 AM, Brian Sullivan wrote:
13.1.2 and above brings a lot of needed performance, I would upgrade
at least to that.
On 10/6/2015 10:41 AM, Carl Peterson wrote:
Is there an issue with 13.3 SMs on 12.2.2 APs? We are testing the
450d and it looks like it is connecting but really isn't.
Any chance this is a polarity issue? All of our dished SMs are
connecting fine. I seem to remember an issue with some 450APs having
H and V swapped internally.
LUID: 037 - [0a-00-3e-xx-xx-xx]
<http://10.13.39.140:1080/?mac_esn=0a003eb29e8a> State: IN SESSION
(Encrypt Disabled)
Site Name: NAME
PMP 450 MIMO OFDM
Software Version: CANOPY 13.3
FPGA Version: 112414 (DES, Sched, US/ETSI) P11
Session Timeout: 0, AirDelay: 2950 ns, 29 bits (approximately
0.274 miles (1449 feet))
Session Count: 4, Reg Count: 4, Re-Reg Count: 0, Session Uptime:
24 d, 21:26:07
Power Level : -54.2 dBm Signal Strength Ratio : 7.0 dB V - H dB
Signal to Noise Ratio: 14 dB V / 0 dB H
Sustained Uplink Data Rate (AP): 65000 (kbps)
Uplink Burst Allocation (AP): 2500000 (kbit)
Sustained Downlink Data Rate (AP): 65000 (kbps)
Downlink Burst Allocation (AP): 2500000 (kbit)
Broadcast/Multicast Allocation (AP): 50000 (kbit)
Max Burst Uplink Rate (D): 0 (kbit)
Max Burst Downlink Rate (AP): 0 (kbit)
Low Priority Uplink CIR (D): 0 (kbps)
Low Priority Downlink CIR (D)