Those aren't...
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Oct 21, 2015 at 1:51 PM, Paul McCall <pa...@pdmnet.net> wrote: > 10Gbit fiber SFPs I would assume ? > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jaime Fink > *Sent:* Wednesday, October 21, 2015 1:49 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] B11 copper v fiber > > > > > > *From: *Af <af-boun...@afmug.com> on behalf of Josh Luthman < > j...@imaginenetworksllc.com> > *Reply-To: *"af@afmug.com" <af@afmug.com> > *Date: *Wednesday, October 21, 2015 at 10:37 AM > *To: *"af@afmug.com" <af@afmug.com> > *Subject: *Re: [AFMUG] B11 copper v fiber > > > > Gigabit is a lot easier at fiber than copper. At least in my experience. > I think you'd be a fool to do copper when you can easily do fiber. > > > > Thank for you doing SFP by the way, Mimosa!!! > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Wed, Oct 21, 2015 at 1:35 PM, Scott Vander Dussen <sc...@velociter.net> > wrote: > > Mimosa recommends these SFP modules: > > AFBR-5710APZ > <http://www.mouser.com/ProductDetail/Avago-Technologies/AFBR-5710APZ/?qs=%2fha2pyFaduhaC58MVLqFl44%252bx6hS5cz1YhojZqdUVyI7Wp%252bPDPG4Rg%3d%3d> > 1.25 GBd MMF Transceiver for Gigabit Ethernet, SFP, Bail de-latch, Ext Temp > (-40 to 85C) > > AFCT-5715ALZ > <http://www.mouser.com/ProductDetail/Avago-Technologies/AFCT-5715ALZ/?qs=%2fha2pyFadujhJvt9bnk9ES81EX7WBD7ZrbBItK6kCZLHNEN0X0r%2fGA%3d%3d> > 1.25 GBd SMF Transceiver with DMI for Gigabit Ethernet, SFP, Std de-latch, > Ext Temp (-40 to 85C) > > FTLF8519P3BTL > <http://www.mouser.com/ProductDetail/Finisar/FTLF8519P3BTL/?qs=%2fha2pyFaduh7nd4n5kIrSHIvC1uJRiq8EwAcMil5upKcc76M2JIwDQ%3d%3d> > Fiber Optic Transmitters, Receivers, Transceivers GigE 1x/2x FC, 2.129 Gb/s > trnscvr, 550m > > FTLF1318P3BTL > <http://www.mouser.com/ProductDetail/Finisar/FTLF1318P3BTL/?qs=%2fha2pyFaduikXVilIKTQvJhiq4n%2fsUYWQAU7K0qEJnA1f%252bqIw1quUw%3d%3d> > Fiber Optic Transmitters, Receivers, Transceivers 1310nmFP GigE 1x FC > 1.25Gb/s trnscvr10km > > > > Assuming cable length and EMI are not issues, is there any benefit to > using fiber over copper? > > > > `S > > >
