Jamie; Is the b11 based on 802.11 silicone?
Is the b11 capable of 750fd or 1500fd? Thank you On Wed, Oct 21, 2015 at 11:29 AM, Rory Conaway <r...@triadwireless.net> wrote: > And Mike quits sending you nasty emails because you think copper was sent > to us by an evil entity from another dimension. > > > > Rory > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Adam Moffett > *Sent:* Wednesday, October 21, 2015 11:27 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] B11 copper v fiber > > > > Two reasons: > > 1) Peace of mind regarding *future* EMI problems > 2) It's pretty sexy these days to tell people you have fiber to the > antenna, > > On 10/21/2015 1:35 PM, Scott Vander Dussen wrote: > > Mimosa recommends these SFP modules: > > AFBR-5710APZ > <http://www.mouser.com/ProductDetail/Avago-Technologies/AFBR-5710APZ/?qs=%2fha2pyFaduhaC58MVLqFl44%252bx6hS5cz1YhojZqdUVyI7Wp%252bPDPG4Rg%3d%3d>� > 1.25 GBd MMF Transceiver for Gigabit Ethernet, SFP, Bail de-latch, Ext Temp > (-40 to 85C) > > AFCT-5715ALZ > <http://www.mouser.com/ProductDetail/Avago-Technologies/AFCT-5715ALZ/?qs=%2fha2pyFadujhJvt9bnk9ES81EX7WBD7ZrbBItK6kCZLHNEN0X0r%2fGA%3d%3d> > 1.25 GBd SMF Transceiver with DMI for Gigabit Ethernet, SFP, Std de-latch, > Ext Temp (-40 to 85C) > > FTLF8519P3BTL > <http://www.mouser.com/ProductDetail/Finisar/FTLF8519P3BTL/?qs=%2fha2pyFaduh7nd4n5kIrSHIvC1uJRiq8EwAcMil5upKcc76M2JIwDQ%3d%3d> > Fiber Optic Transmitters, Receivers, Transceivers GigE 1x/2x FC, 2.129 Gb/s > trnscvr, 550m > > FTLF1318P3BTL > <http://www.mouser.com/ProductDetail/Finisar/FTLF1318P3BTL/?qs=%2fha2pyFaduikXVilIKTQvJhiq4n%2fsUYWQAU7K0qEJnA1f%252bqIw1quUw%3d%3d> > Fiber Optic Transmitters, Receivers, Transceivers 1310nmFP GigE 1x FC > 1.25Gb/s trnscvr10km > > � > > Assuming cable length and EMI are not issues, is there any benefit to > using fiber over copper? > > � > > `S > > >
