You can. It will take up to 57v. And once again I'll yell at Forrest to correct that posting.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Nov 30, 2015 at 4:51 PM, Brandon Yuchasz <[email protected]> wrote: > Thanks Josh, > > I was not sure if I could just put 48 volts to the unit powering the 450i > or not. > > > > Best regards, > > Brandon Yuchasz > > GogebicRange.net > > www.gogebicrange.net > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Josh Luthman > *Sent:* Monday, November 30, 2015 3:42 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] syncinjector for 450i and FSK100 > > > > > http://store.packetflux.com/gigabit-syncinjector-for-24-volt-cambium-radios/ > > http://store.packetflux.com/syncpipe-basic/ > > Plus a 24v and a 48v power supply (450i is 48v, fsk is 24v). > > > > Yes you can daisy chain from the syncpipe, to the syncinjector and so on > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Mon, Nov 30, 2015 at 4:37 PM, Brandon Yuchasz <[email protected]> > wrote: > > Just to be clear can anyone tell me what version of syncinjector I need to > run a pmp450i? Is there a version that can run both a 450i and pmp100 AP? > If not can I daisy chain the GPS sync from the first syncinjector running > the 450i to the syncinjector running the older pmp100 aps? > > > > > > Best regards, > > Brandon Yuchasz > > GogebicRange.net > > www.gogebicrange.net > > > > >
