matt do you have a co-location tool spreadsheet for the 5ghz 450 to co-locate with PMP100 & PMP430? Also why is that tool not accessible directly from the downloads page? maybe y'all could make a web page on your support site to do frame calculations with a visual tool. a visual tool like that is WAY more handy than the frame calc available in the radios. seeing the frame structure like in the white paper is also very helpful.
if not, then maybe santa could bring me one for christmas??? Thanks, -Sean On Mon, Dec 14, 2015 at 11:14 AM, Matt Mangriotis < [email protected]> wrote: > I just posted the whitepaper and excel tool in the community forum, and it > will be up on the support section of the website later today. > > > > > http://community.cambiumnetworks.com/t5/PMP-450/450i-FSK-900-MHz-Frame-Calculator/m-p/47458#M1654 > > > > Sorry for the delay, working too hard on getting these things shipping to > follow up on the paperwork… > > > > Matt > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Sean Heskett > *Sent:* Monday, December 14, 2015 12:09 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] 900MHz 450i pager reject filter in GUI > > > > seems pretty self explanatory from the screenshot you sent. > > > > if you enable pager reject filter it blocks everything above 920Mhz. so > they must have a notch filter in there that you can turn on and off. > > > > the airframe legacy mode is for co-locating with FSK900 so that you can > time them together. pick your timing source and software version on the > co-located FSK APs and that will tell you what to set the drop down menu to > so that they will be synced. > > > > 2 cents > > > > -sean > > > > > > On Mon, Dec 14, 2015 at 10:34 AM, Ken Hohhof <[email protected]> wrote: > > Interesting option in the AP config. > > Also Frame Alignment Legacy Mode options. > > I need to look for a user guide update to see if these are explained. > > >
