Configuring M900s and ran scan....scans from 792 to 1212Mhz On Dec 14, 2015 11:23 AM, "Ken Hohhof" <[email protected]> wrote:
> I downloaded the 14.1.1 User Guide and there is some explanation in > there. I had been trying to use something called 450i 14.0 User Guide. > > *From:* Matt Mangriotis <[email protected]> > *Sent:* Monday, December 14, 2015 12:14 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] 900MHz 450i pager reject filter in GUI > > > I just posted the whitepaper and excel tool in the community forum, and it > will be up on the support section of the website later today. > > > > > http://community.cambiumnetworks.com/t5/PMP-450/450i-FSK-900-MHz-Frame-Calculator/m-p/47458#M1654 > > > > Sorry for the delay, working too hard on getting these things shipping to > follow up on the paperwork… > > > > Matt > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Sean Heskett > *Sent:* Monday, December 14, 2015 12:09 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] 900MHz 450i pager reject filter in GUI > > > > seems pretty self explanatory from the screenshot you sent. > > > > if you enable pager reject filter it blocks everything above 920Mhz. so > they must have a notch filter in there that you can turn on and off. > > > > the airframe legacy mode is for co-locating with FSK900 so that you can > time them together. pick your timing source and software version on the > co-located FSK APs and that will tell you what to set the drop down menu to > so that they will be synced. > > > > 2 cents > > > > -sean > > > > > > On Mon, Dec 14, 2015 at 10:34 AM, Ken Hohhof <[email protected]> wrote: > > Interesting option in the AP config. > > Also Frame Alignment Legacy Mode options. > > I need to look for a user guide update to see if these are explained. > > >
