Id love to hear it ends up having some magiciam On Mon, Dec 14, 2015 at 1:14 PM, Ken Hohhof <[email protected]> wrote:
> Like any other 450 product, it should work great if you have a –65 signal > and 32 dB SNR. > > 256QAM and MIMO in a 7 MHz channel should increase capacity something like > 6X over FSK in a 8 MHz channel. > > But that kind of SNR is unrealistic in 900 MHz. If the SNR is only 10 dB, > who knows? We’ll see. It may depend on the type of interference. Other > Canopy? FHSS like Smartgrid, RTK and SCADA? Out of band high power > paging? Baby monitors and old analog cordless phones? > > > > *From:* That One Guy /sarcasm <[email protected]> > *Sent:* Monday, December 14, 2015 1:03 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] 900MHz 450i pager reject filter in GUI > > Im curious how this will be successful, is it capable of delivering more > capacity if configured down to an fsk channel size than the fsk? > > On Mon, Dec 14, 2015 at 12:53 PM, Jaime Solorza <[email protected] > > wrote: > >> Configuring M900s and ran scan....scans from 792 to 1212Mhz >> On Dec 14, 2015 11:23 AM, "Ken Hohhof" <[email protected]> wrote: >> >>> I downloaded the 14.1.1 User Guide and there is some explanation in >>> there. I had been trying to use something called 450i 14.0 User Guide. >>> >>> *From:* Matt Mangriotis <[email protected]> >>> *Sent:* Monday, December 14, 2015 12:14 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] 900MHz 450i pager reject filter in GUI >>> >>> >>> I just posted the whitepaper and excel tool in the community forum, and >>> it will be up on the support section of the website later today. >>> >>> >>> >>> >>> http://community.cambiumnetworks.com/t5/PMP-450/450i-FSK-900-MHz-Frame-Calculator/m-p/47458#M1654 >>> >>> >>> >>> Sorry for the delay, working too hard on getting these things shipping >>> to follow up on the paperwork… >>> >>> >>> >>> Matt >>> >>> >>> >>> *From:* Af [mailto:[email protected]] *On Behalf Of *Sean Heskett >>> *Sent:* Monday, December 14, 2015 12:09 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] 900MHz 450i pager reject filter in GUI >>> >>> >>> >>> seems pretty self explanatory from the screenshot you sent. >>> >>> >>> >>> if you enable pager reject filter it blocks everything above 920Mhz. so >>> they must have a notch filter in there that you can turn on and off. >>> >>> >>> >>> the airframe legacy mode is for co-locating with FSK900 so that you can >>> time them together. pick your timing source and software version on the >>> co-located FSK APs and that will tell you what to set the drop down menu to >>> so that they will be synced. >>> >>> >>> >>> 2 cents >>> >>> >>> >>> -sean >>> >>> >>> >>> >>> >>> On Mon, Dec 14, 2015 at 10:34 AM, Ken Hohhof <[email protected]> wrote: >>> >>> Interesting option in the AP config. >>> >>> Also Frame Alignment Legacy Mode options. >>> >>> I need to look for a user guide update to see if these are explained. >>> >>> >>> >> > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
