Hi Guys, There are actually two sets of "DFS" unlocks. The older unlock is from a few years ago to unlock DFS on RM5/NanoBridge/NanoStation. Those keys will not unlock PowerBeam/NanoBeam or AC products.
NanoBeam/PowerBeamM units will require 5.6.3 + unlock codes generated in the last few months (June 2015). AC products can be unlocked as well, but this is currently only available on 7.2/8.0 beta firmware. R5AC-PTP and PTMP models are limited to bands above 5470MHz due to airPrism filtering. The R5-AC-PRISM will have full U-NII band support. If you need new codes/stickers for PowerBeamM/NanoBeamM or AC products, you can request them here: https://www.ubnt.com/fcclabelrequest/ Please feel free to email me directly if you have any questions. On Wed, Dec 16, 2015 at 3:13 PM, <jaldri...@totalhighspeed.net> wrote: > We have been using keys with the nanostations with no problem. I cannot > get the powerbeams to work at all. > > Sent from my iPhone > > On Dec 16, 2015, at 2:10 PM, Ben Moore <ben.mo...@ubnt.com> wrote: > > Yes, they are...Please check with support team if they are not showing up > for you as could be something to do with the unlock code - > supp...@ubnt.com > > I will also ask them to chime in here. > > Thanks, > Ben > > On Wed, Dec 16, 2015 at 1:07 PM, <jaldri...@totalhighspeed.net> wrote: > >> So are powerbeams not capable? >> >> Sent from my iPhone >> >> On Dec 16, 2015, at 2:01 PM, Ben Moore <ben.mo...@ubnt.com> wrote: >> >> Yes, datasheets are being updated (most are done, just not uploaded yet). >> >> On Wed, Dec 16, 2015 at 10:47 AM, Mathew Howard <mhoward...@gmail.com> >> wrote: >> >>> Well, right. that was the case up until airOS 5.6.3 was released... I >>> expect they'll update the data sheets when the radios are shipping with the >>> new firmware. >>> >>> On Wed, Dec 16, 2015 at 11:11 AM, <jaldri...@totalhighspeed.net> wrote: >>> >>>> I was just stating what the data sheet says about the US version versus >>>> worldwide version. I know that we have been buying nanobeams And using them >>>> just fine we ordered powerbeams this last time and cannot do anything other >>>> than 5725-5850. >>>> <image1.PNG> >>>> Sent from my iPhone >>>> >>>> On Dec 16, 2015, at 10:50 AM, Mathew Howard <mhoward...@gmail.com> >>>> wrote: >>>> >>>> You most certainly can use the US radios in 5150-5250, and whoever said >>>> that only the world version supports it is wrong. >>>> >>>> You just need to upgrade the firmware to 5.6.3, and enter the unlock >>>> key - which you do need to request from UBNT. >>>> >>>> On Wed, Dec 16, 2015 at 10:39 AM, Ken Hohhof <af...@kwisp.com> wrote: >>>> >>>>> Ben, what does “approvals are in” mean? >>>>> >>>>> I don’t give a rat’s ass whether you have approvals in. I want to >>>>> know if I can order equipment for a customer install, upgrade to latest >>>>> released firmware if necessary, and operate it in the 5150-5250 band. >>>>> That’s all that matters to me. Anything else is your internal process to >>>>> get to what I need, which is a radio I can buy from my distributor and >>>>> send >>>>> out with an installer to do a customer install off a Rocket M5 AP we >>>>> installed 8 months ago. >>>>> >>>>> When I go to the grocery store to buy 2% milk, they don’t tell me the >>>>> farmer has bought a cow, they either have 2% milk on the shelf or they >>>>> don’t. Status reports on the feeding and milking of the cow don’t give me >>>>> something to pour on my cereal. >>>>> >>>>> >>>>> *From:* Ben Moore <ben.mo...@ubnt.com> >>>>> *Sent:* Wednesday, December 16, 2015 10:23 AM >>>>> *To:* af@afmug.com >>>>> *Subject:* Re: [AFMUG] M series NanoBeam/PowerBeam and U-NII-1 >>>>> >>>>> Hi Guys - >>>>> >>>>> The approvals for both lower band and DFS are in. Same w it AC gear. >>>>> >>>>> Thanks, >>>>> Ben >>>>> >>>>> On Wed, Dec 16, 2015 at 9:05 AM, Ken Hohhof <af...@kwisp.com> wrote: >>>>> >>>>>> This is just incredible. They've been screwing around with this for >>>>>> about 8 months. Ubiquiti seems to be giving the middle finger to the US >>>>>> market. I am going to have to look at ripping out some APs and PTP >>>>>> links I >>>>>> put up back in April and replacing them with something else. I don't >>>>>> know >>>>>> how to explain to a customer that I can't order equipment for their >>>>>> service >>>>>> because my vendor has their head up their ass, that just reflects badly >>>>>> on >>>>>> me for using their equipment. >>>>>> >>>>>> >>>>>> >>>>>> -----Original Message----- From: jaldri...@totalhighspeed.net >>>>>> Sent: Wednesday, December 16, 2015 4:25 AM >>>>>> To: af@afmug.com >>>>>> Subject: Re: [AFMUG] M series NanoBeam/PowerBeam and U-NII-1 >>>>>> >>>>>> >>>>>> Only the world version supports it. >>>>>> >>>>>> Sent from my iPhone >>>>>> >>>>>> On Dec 15, 2015, at 11:06 PM, Ken Hohhof <af...@kwisp.com> wrote: >>>>>>> >>>>>>> Does anybody know if the NBE-M5-19 and PBE-M5-300/400/620 allow >>>>>>> 5150-5250 MHz with release firmware now? And what is the likelihood any >>>>>>> product I bought from a distributor today would support this band out of >>>>>>> the box without requesting a key from Ubiquiti? >>>>>>> >>>>>>> You'd think Ubiquiti would have this somewhere, but I can't find it. >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>>> >>> >> >