At Powercode? User since 2008, if you're still interested contact me offlist and I'll make sure you're taken care of.
Are you using any software at all? If not, you'll want to pick something up to do SNMP. CactiEZ would get things started, but if it were me I'd get Powercode/VISP/Wispmon/etc to do everything once (one place for billing, customer equipment, monitoring, etc). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jun 14, 2016 at 11:20 AM, Brandon Yuchasz <li...@gogebicrange.net> wrote: > Who did you ask and how loudly? No powercode here I will have to find a > different option. > > > > How does Ubiquiti handle this type of thing? We are 100% cambium in our > network and only recently started in with the ePMP. > > > > Best regards, > > Brandon Yuchasz > > GogebicRange.net > > www.gogebicrange.net > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Luthman > *Sent:* Tuesday, June 14, 2016 9:36 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Session Counts in ePMP > > > > I've asked for this stuff. For now the signal and session are graphed in > Powercode. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Jun 14, 2016 10:25 AM, "Brandon Yuchasz" <li...@gogebicrange.net> > wrote: > > Since I came from a FSK background and then started in on the 450 platform > I am having a few issues troubleshooting customers on ePMP. In FSK and 450 > you can log into the AP pull up the Session Status tab and then scroll > through looking at the session counts, re-registrations, power levels and > even see the SMs that are idle. So if you are looking up a customer that > “hasn’t has internet since Monday” and you see they went idle with only one > session count and a -62 at the time. You can assume the power supply got > damaged in the storm Monday afternoon. A little on the phone support and > they verify no green light. On the other hand now that the leaves are on > the trees and nice and thick we can scroll through the session counts and > find customers that have been up for 8 years that are now having issues > with the tree cover. 568 session counts in 24 hours. Yep best put them in > the schedule and get out at take a look. > > > > So…. Where the heck do I find similar information in ePMP. I can’t even > find if a session is idle. I can find how many SMs have registered to the > AP but no specifics about which SM it was or if all the extras are one SM , > guys doing site surveys or a combo of both. So how are you guys > troubleshooting the ePMP platform? I feel blind using this stuff. > > > > Best regards, > > Brandon Yuchasz > > GogebicRange.net > > www.gogebicrange.net > > >
