I didn't see any difference in performance going from 13.1.3 to 13.4.1.
On 7/6/2016 9:41 AM, Brandon Yuchasz wrote:
Chris in the interest of muddying the waters more and contradicting
what Sean just said. We also are using 13.4.1 on all APs since we were
collocating with 450i. Its been very stable for us as well and I did
not notice any week signal connections becoming worse. The
contradiction is we did not upgrade SM firmware. Most are still on
10.5. I know we should but many are being replaced by epmp or 450i.
maybe you should define a week connection.
Best regards,
Brandon Yuchasz
GogebicRange.net
www.gogebicrange.net <http://www.gogebicrange.net/>
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Christopher Gray
*Sent:* Wednesday, July 06, 2016 4:03 AM
*To:* af@afmug.com
*Subject:* [AFMUG] PMP100 900MHz Best Firmware?
I upgraded a system that had a mix of firmware ranging 7.x to 12.x. I
moved everything to 13.4.1.
I'm seeing stability issues. Weak links or high interference links are
dropping regularly where they were not dropping in the past. Decent
links appear to be holding 2X modulation better, but I need to keep
the weaker links up.
Is there a consensus or at least good recommendation regarding the
most stable firmware for the 900MHz PMP100?
Thank you - Chris