mary jane? On Tue, Dec 20, 2016 at 2:17 PM, George Skorup <[email protected]> wrote:
> ...at the cost of somewhat high probability of interfering with the > opposite sector on the same freq. Been there, done that. Note than -52dBm > is the default SM target receive level for SM Tx power control. I usually > try to back this off to -55 or -57. > > And yes, I have short range SMs receiving at -45 to -50dBm. These will > sometimes see the opposite sector. 30+dB of f/b ratio is great, but in this > instance, it's not enough to achieve 256QAM. So you need to be very careful > about what you're doing with customers close to sites. Some of these we've > moved to an omni (yeah I know) at 5.4 dedicated to short range customers. > > On 12/20/2016 1:58 PM, Matt Mangriotis wrote: > > -55 dBm is a perfectly acceptable target level.� In fact, sometimes, > you�ll want to set the target slightly higher (like -52 dBm) to overcome > higher noise levels. > > > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
