It looks like EVPN\VXLAN should be the new targets.
-----
Mike Hammett
Intelligent Computing Solutions
Midwest Internet Exchange
The Brothers WISP
----- Original Message -----
From: "Gino Villarini" <g...@aeronetpr.com>
To: af@afmug.com
Sent: Monday, January 23, 2017 8:44:01 AM
Subject: Re: [AFMUG] Switch expert help/advice
Ill very much so would like to se TRILL and/or SPB implemente in major vendor
Switches… But it appears as it will never happen
Not enough traction
From: Af < af-boun...@afmug.com > on behalf of Josh Reynolds <
j...@kyneticwifi.com >
Reply-To: " af@afmug.com " < af@afmug.com >
Date: Sunday, January 22, 2017 at 1:27 AM
To: " af@afmug.com " < af@afmug.com >
Subject: Re: [AFMUG] Switch expert help/advice
Only works for ring topologies, not tree.
Gino Villarini
President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
On Sat, Jan 21, 2017 at 9:45 PM, Lewis Bergman < lewis.berg...@gmail.com >
wrote:
G.8032 ERP always worked great for us. Very fast convergence. I think every
manufacturer has their own spin on it.
On Jan 21, 2017 7:44 PM, "Mark Radabaugh" < m...@amplex.net > wrote:
<blockquote>
You want priority lowest on the switch that is 'most central' to your network.
For edge ports you probably want bpdu block or shutdown depending on how you
want to handle it.
You really need to control bpdu's coming from your customers. You don't want a
customer accidentally (or maliciously) taking control of your topology.
Mark Radabaugh
Amplex
22690 Pemberville Rd
Luckey, OH 43447
419-261-5996
On Jan 21, 2017, at 4:30 PM, Mike Hammett < af...@ics-il.net > wrote:
<blockquote>
STP and RSTP really need to die. TRILL and SPB were invented because STP and
RSTP have some big deficiencies.
-----
Mike Hammett
Intelligent Computing Solutions
Midwest Internet Exchange
The Brothers WISP
From: "Sterling Jacobson" < sterl...@avative.net >
To: af@afmug.com
Sent: Wednesday, January 18, 2017 2:02:39 PM
Subject: Re: [AFMUG] Switch expert help/advice
Don’t all switches use some form of STP/RSTP Gino?
I’m talking about best practices for a switch bank really.
Do I set STP priority number lower than the default on the switch for the ports
going to other switches?
And what is the term or feature that means ignore STP type packets from that
port (customer ports).
I think I’m getting STP type topology changes every time a downstream customer
port has a up/down change etc.
I don’t want those.
From: Af [ mailto:af-boun...@afmug.com ] On Behalf Of Gino Villarini
Sent: Wednesday, January 18, 2017 2:00 AM
To: af@afmug.com
Subject: Re: [AFMUG] Switch expert help/advice
Why are you using stp?
On 1/18/17, 12:33 AM, "Af on behalf of Sterling Jacobson"
Gino Villarini
President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
cid:image001.png@01D2718B.144BF200
< af-boun...@afmug.com on behalf of sterl...@avative.net > wrote:
>Any of you guys work with switches a lot?
>
>I use banks of switches in my fiber, set up per neighborhood.
>
>But really they are all linked via fiber so it's pretty much like a
>datacenter.
>
>I'm using a few MPLS/VPLS tunnels to the switch banks.
>
>I'm having a real hard time tracking down a loop issue though.
>
>It's related to MikroTik lovely change in version 6.38 for STP/RSTP
>bridge stuff.
>
>My problem is with an IBM switch I don't know very well.
>
>I suspect I have settings wrong for STP/RSTP etc.
>
>The switches are a simple configuration of VLAN 1/default for customer
>traffic, then another VLAN for management from the device at their
>house/MDU.
>
>I pull out the VLAN management at the mikrotik and bridge it with an area
>wide L2 MPLS network.
>
>My problem is the IBM switches keep shutting down access to customer data
>or management or the other switches they are connected to.
>The crude method of recovery is reboot the switch.
>
>At the 'head' of the VPLS network I use an EOIP tunnel to a hosted
>mikrotik that hosts the Dude and a few other management VM's on that
>layer2 network.
>
>I'm regretting I did that and didn't create a more sophisticated routed
>management network.
>
>But the hosted mikrotik is complaining of loop packets and sometimes just
>goes wild and shuts down it's EOIP connecting interface for 60 seconds.
>I can't seem to find a way to tell it to NOT do that either, seems like
>it's built in to 6.38 no matter what Loop Protection I turn off or STP I
>disable.
>It's not like it's a lot of traffic, it's just seeing some BPDU or STP
>type packets and killing itself.
>
>What is the best practice for switches regarding RSTP/PVRST BDPU guards
>and STP root paths etc?
>
>The switches typically have two uplink ports going to the router or
>another switch, the rest are customer facing ports.
</blockquote>
</blockquote>
