Gotta start somewhere...
On 2/19/2017 3:31 PM, Ken Hohhof wrote:
Not an ePMP specific reply, but I’m not sure I’d use the built-in
speed test to determine what experience the customer is getting.
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *David Milholen
*Sent:* Sunday, February 19, 2017 2:05 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] ePMP QOS no worky
Be sure and review your SNR at the customer site. We have seen where
AC routers with 5G radios turned up that will make the Epmp deaf.
Also, if there is a higher nois floor at the customer site suggest
scanning to find a cleaner channel for the AP.
On 2/19/2017 10:34 AM, Jerry Head wrote:
I am having trouble getting the QOS to work even close to
correctly on an ePMP 5ghz shot.
The AP only has on customer subscribed at this time and I cannot
seem to get the QOS to go above about 4meg on the download, upload
seems about right.
I have set the MIR values correctly on the AP but the download
just will not go over 4meg.
When I remove the QOS the download is right where it should be,
around 90 meg.
I am using the over the air speed test built in to the radios and
both are on 3.2.2 firmware.
Does anyone have any suggestions?
--
