Ryan, something is wrong. Did you try a different G2 or cable? Rory
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Ray Sent: Wednesday, March 8, 2017 9:42 PM To: af@afmug.com Subject: Re: [AFMUG] Problem with Mimosa G2 & 100Mb routers It was an after need. They wanted to implement a system with their own router but needed internet right away. So I left a G2 and switched it into passthru after they were ready. On Wed, Mar 8, 2017 at 8:15 PM, Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote: I’m sort of confused. Why are you using a G2 if you have your own router? Rory From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of Ryan Ray Sent: Wednesday, March 8, 2017 8:04 PM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] Problem with Mimosa G2 & 100Mb routers Not sure if anyone else is deploying the Mimosa platform en-mass but came across a new issue today in case you're fighting with things. The issue: Client Router receives very poor download no matter what signal conditions are like. Download capped around 10Mb/s. Upload was unaffected. The equipment: A5 – 2.2.1 Version – GPS Synced C5 – 2.2.1 Version – GPS Synced G2 in passthru – 1.1.2 Version Client Router – Asus N600 The problem: G2 has an issue with 100Mb routers. Plugging in a 1Gb client into the passthrued G2 resulted in full speed. Plugging a 100Mb router caused the download to drop to 10Mb/s levels. The solution: 1. Replace G2 with regular power supply, fixed issue. 2. In C5 change the duplex from auto to 100MF, fixed issue while still using G2.
